Manual

1
/
4
-DIN,
1
/
8
-DIN &
1
/
16
- DIN Controllers & Indicators - Product Manual
Page 28 Connections 59305, Issue 7 – March 2014
Option Slot 1 - SSR Driver Output Module
If option slot 1 is fitted with an SSR driver output module, make connections as illustrated.
The solid-state relay driver is a 0-10V DC signal, load resistance must be no less than 500
ohms. SSR driver outputs are not isolated from the signal input or other SSR driver outputs.
1
/
16
DIN
1
/
4
DIN &
1
/
8
DIN
Figure 19. Option Slot 1 - SSR Driver Module
Option Slot 1 - Triac Output Module
If option slot 1 is fitted with a Triac output module, make connections as shown. This output
is rated at 0.01 to 1 amp @ 280V AC 50/60Hz. (140V max for direct Valve Motor control).
1
/
16
DIN
1
/
4
DIN &
1
/
8
DIN
Figure 20. Option Slot 1 - Triac Module
Option Slot 1 - Linear Voltage or mADC Output module
If option slot 1 is fitted with a DC linear output module, make connections as illustrated.
1
/
16
DIN
1
/
4
DIN &
1
/
8
DIN
Figure 21. Option Slot 1 - Linear Voltage & mADC Module
19
20
_
21
+
1
2
+
3
_
19
20
_
21
+
1
2
+
3
_
1
2

20
21
