www.weslo.com Model No. WLTL29911.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: Please register this product (see the limited warranty on the back cover of this manual) before contacting Customer Care. 1-866-699-3756 CALL TOLL-FREE: Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–4 p.m. MT ON THE WEB: www.wesloservice.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning this or any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. or more amps.
20. Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and press the power switch into the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the power switch.) 25. Never drop or insert any object into any opening on the treadmill. 22. When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position. 27.
BEFORE YOU BEGIN Thank you for selecting the new WESLO® CADENCE AF 5.1 treadmill. The CADENCE AF 5.1 treadmill offers a selection of features designed to make your workouts at home more effective. And when youʼre not exercising, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills. ing this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us.
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton.
1. With the help of a second person, carefully tip the treadmill onto its side. Unfold the Frame (51) away from the Uprights (53, 54). 1 Orient the Base (52) as shown. Attach the Base to the Left Upright (53) and the Right Upright (54) with four M10 x 58mm Bolts (2) and four M10 Nuts (73). Start all four Nuts, and then tighten them. 2 51 52 54 73 With the help of a second person, carefully tip the treadmill so that the Base (52) is flat on the floor. 2 2 2.
3. Set the Right Handrail (33) on the console assembly. Make sure that the console wire is not pinched. Remove the tie from the bracket on the Right Handrail. If necessary, press the Cage Nuts (101) back into place. 3 Wire Tie Console Wire 85 101 Start an M5 x 16mm Screw (85) with an M5 Star Washer (7) into the Right Handrail, and then start two M4.2 x 19mm Screws (10) into the Right Handrail. Tighten the M5 x 16mm Screw and then tighten the two M4.2 x 19mm Screws; do not overtighten the Screws.
6. Start an M8 x 15mm Bolt (8) with an M8 Star Washer (5) into each Upright (53, 54). Then, firmly tighten all six M8 x 15mm Bolts (8). 6 8 8 5 53 8 54 8 7. Attach the Latch Housing (48) to the Left Upright (53) with two M4.2 x 18mm Screws (58); start both Screws, and then tighten them. 5 7 48 53 58 8. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see page 17).
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with highperformance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will cause excessive wear. HOW TO PLUG IN THE POWER CORD DANGER: Improper connection dance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be compatible with AFCI-equipped outlets.
CONSOLE DIAGRAM Key Clip FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. When the manual mode of the console is selected, the speed of the treadmill can be changed with the touch of a button. As you exercise, the displays will provide continuous exercise feedback. You can even measure your heart rate using the thumb heart rate monitor. The console also offers four preset workouts.
HOW TO TURN ON THE POWER IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 10). Next, locate the power switch on the treadmill frame near the power cord. Make sure that the switch is in the reset position. 3. Start the walking belt.
The lower right display—The lower right display can show the speed of the walking belt and the approximate number of calories that you have burned. If the displayed heart rate appears to be too high or too low, or if your heart rate is not displayed, lift your thumb for a few seconds, and then reposition your thumb on the heart rate monitor. Remember to stand still while measuring your heart rate. 6. When you are finished exercising, remove the key from the console.
3. Start the walking belt. HOW TO CHANGE THE INCLINE OF THE TREADMILL Press the Start button or the Speed increase button to start the workout. When you press the button, the treadmill will automatically adjust to the speed setting that is programmed for the first segment. Hold the handrails and begin walking. To vary the intensity of your exercise, you can change the incline of the treadmill. There are two incline levels. Before changing the incline, remove the key and unplug the power cord.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow below. CAUTION: Do not hold the frame by the plastic foot rails. Bend your legs and keep your back straight. Raise the frame about halfway to the vertical position.
TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. SYMPTOM: The displays of the console do not function properly a. Remove the key from the console and UNPLUG THE POWER CORD. Next, remove the three M4.2 x 19mm Washer Head Screws (20) and the two indicated M5.5 x 25mm Screws (25). Then, carefully remove the Hood (65).
SYMPTOM: The walking belt slows when walked on of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered. a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b.
EXERCISE GUIDELINES WARNING: Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. The heart rate monitor is not a medical device. Various factors may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determining heart rate trends in general. These guidelines will help you to plan your exercise program.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 2 4 2 9 6 1 2 6 2 10 2 1 4 2 1 2 1 1 4 3 6 1 1 1 6 6 2 4 2 2 1 4 1 2 2 2 1 2 1 2 4 4 4 6 2 2 3 1 1 2 1 Description M10 x 110mm Bolt M10 x 58mm Bolt M4.2 x 13mm Tek Screw M4.2 x 16mm Screw M8 Star Washer Warning Decal M5 Star Washer M8 x 15mm Bolt M10 Star Washer M4.
29 36 75 20 40 44 72 60 82 74 21 42 19 95 4 6 27 25 72 29 46 98 55 21 42 75 78 44 10 74 61 36 50 67 25 95 46 72 27 4 64 19 72 25 93 25 40 82 51 68 86 28 44 98 25 19 4 76 83 41 62 89 71 3 78 96 97 56 100 31 28 50 19 25 10 41 44 96 41 17 94 93 97 21 18 41 EXPLODED DRAWING A Model No. WLTL29911.
EXPLODED DRAWING B Model No. WLTL29911.
EXPLODED DRAWING C 77 88 10 10 5 5 8 10 10 8 8 77 14 43 43 80 2 63 3 39 32 43 16 69 70 69 26 13 43 22 11 73 9 23 63 26 63 26 85 54 11 2 16 10 5 52 45 10 73 9 32 69 101 8 13 32 7 53 48 1 69 70 5 101 22 33 10 85 24 58 35 77 10 7 77 Model No. WLTL29911.
EXPLODED DRAWING D Model No. WLTL29911.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.
