Model No. WETL13806.0 Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: 08457 089 009 or write: ICON Health & Fitness, Ltd. Customer Service Department Unit 4 Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG UK email: csuk@iconeurope.com CAUTION Read all precautions and instructions in this manual before using this equipment.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 12. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly.
23. DANGER: Always unplug the power other than the procedures in this manual should be performed by an authorized service representative only. cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing 24. This treadmill is intended for in-home use only.
BEFORE YOU BEGIN Thank you for selecting the new WESLO® CADENCE C6 treadmill. The CADENCE C6 treadmill combines advanced technology with innovative design to make your workouts at home more effective and enjoyable. And when you’re not exercising, the CADENCE C6 treadmill can be folded up, requiring less than half the floor space of other treadmills. ing this manual, please see the front cover of this manual. To help us assist you, please note the product model number and serial number before contacting us.
Washer (29)–4 Star Washer (81)–4 2 3/4” Bolt (47)–4 ASSEMBLY Handrail Washer (11)– Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to 4” Bolt (120)–2 the top of the walking belt or the shipping carton.
2. Slide the two Wheel Housings (45) onto the Base (52). Attach each Wheel Housing with two Wheel Housing Bolts (13), two Wheel Housing Washers (32), and two Wheel Housing Nuts (43). 2 32 45 43 13 32 32 45 13 43 32 52 3. Position the Base (52) as close to the front of the treadmill as possible. 3a 3 98 54 98 See drawing 3a. Locate the wire tie in the Right Upright (54). Tie the wire tie securely to the connector on the end of the Wire Harness (98).
4. See the left inset drawing and identify a Frame Spacer (11). Hold the Frame Spacer between the Right Upright (54) and the Frame (51). Attach the Right Upright to the Frame with a Frame Bolt (1), an Upright Washer (14), and an Upright Star Washer (9); do not tighten the Frame Bolt yet. 4 54 9 1 14 11 51 54 11 14 1 11 9 51 5. Hold the other Frame Spacer (11) between the Left Upright (53) and the Frame (51).
6. Set the Console (91) face down on a soft surface to avoid scratching it. Hold the Right Handrail (33), which has a large hole in the location shown, near the Console. 6 Console Wire Bracket Next, insert the console wire into the hole in the side of the Right Handrail (33). Using needlenose pliers, pull the console wire out of the hole near the bracket on the Right Handrail. Large Hole 33 91 7. Set the Right Handrail (33) on the Console (91). Make sure that the console wire is not pinched.
8. With the help of a second person, hold the Console (91) near the Right Upright (54). 8 Remove the wire tie from the Wire Harness (98). Connect the Wire Harness to the console wire. Make sure to connect the connectors properly (see drawing 8a). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.
. Attach the Latch Assembly (48) to the Left Upright (53) with two Latch Screws (95); start both Latch Screws before tightening either of them. 11 48 53 95 12. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place. The hex key is used to adjust the walking belt (see page 19). To protect the floor or carpet, place a mat under the treadmill.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed.
CONSOLE DIAGRAM Note: If there are thin sheets of plastic on the console, remove the plastic. Key Clip FEATURES OF THE CONSOLE HOW TO TURN ON THE POWER The treadmill console offers a selection of features designed to make your workouts more effective. Plug in the power cord (see page 12). Next, locate the on/off switch on the treadmill frame near the right upright. Make sure that the switch is in the “on” position.
walked or run. Note: During a speed program, the display will show the time remaining in the program instead of the elapsed time. HOW TO USE THE MANUAL MODE 1 Insert the key into the console. The lower right display—The lower right display can show the speed of the walking belt and the approximate number of calories that you have burned. The display also shows your heart rate when you use the handgrip pulse sensor (see step 6 on page 15). See HOW TO TURN ON THE POWER on page 13.
6 The profiles on the console show how the speed of the walking belt will change during the programs. Measure your heart rate if desired. Before using the handgrip pulse sensor, remove the sheets of clear plastic from the metal contacts. In addition, make sure that your hands are clean. 3 Metal Contacts When either button is pressed, the treadmill will automatically adjust to the speed setting that is programmed for the first period of the program. Hold the handrails and begin walking.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. Frame 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the plastic foot rails. To raise the frame, bend your legs, keep your back straight, and lift with your legs rather than your back.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin. Then, release the latch knob. Latch Pin Latch Knob 2. Hold the frame firmly with both hands, and lower it to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.
MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see page 12). If an extension cord is needed, use only a 3-conductor, 1 mm2 (14-gauge) cord that is no longer than 1.5 m (5 ft.).
PROBLEM: The walking belt slows when walked on SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm2 (14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts counterclockwise, 1/4 of a turn.
CONDITIONING GUIDELINES uses easily accessible carbohydrate calories for energy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician.
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 1 2. Hamstring Stretch Sit with one leg extended.
PART LIST—Model No. WETL13806.0 R1006A To locate the parts listed below, see the EXPLODED DRAWING on pages 24 to 27. Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 2 4 2 13 4 1 2 4 2 1 2 1 4 6 1 4 1 1 2 5 7 1 2 2 10 6 2 4 2 2 1 4 1 2 2 2 1 2 2 1 2 4 4 2 2 5 Description Key No. Qty.
Key No. Qty. 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 2 1 2 6 1 2 1 1 1 2 2 1 1 1 1 1 2 1 1 1 Description Key No. Qty.
19 24 29 74 17 60 36 21 42 25 46 18 6 27 67 101 114 25 29 36 74 21 42 55 111 78 46 61 25 50 25 27 19 114 4 64 94 25 25 114 28 76 25 114 108 86 68 102 77 114 107 51 83 62 89 100 71 25 46 92 119 106 108 28 82 94 31 112 113 102 50 23 97 78 93 46 82 56 3 58 46 119 72 40 77 114 92 109 97 23 EXPLODED DRAWING A—Model No. WETL13806.
EXPLODED DRAWING B—Model No. WETL13806.
EXPLODED DRAWING C—Model No. WETL13806.
EXPLODED DRAWING D—Model No. WETL13806.
ORDERING REPLACEMENT PARTS To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Customer Service Department Unit 4, Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG UK Tel: 08457 089 009 Outside the UK: (44) 0113 387 7133 Fax: (44) 0113 387 7125 To help us assist you, please be prepared to provide the following information: • the MODEL NUMBER of the product (WETL13806.
