User Manual

Curtis 1268 Manual, Rev. D A-7
APPENDIX A: EMC & ESD DESIGN CONSIDERATIONS
Monitor Menu
Items are listed here in the order in which they appear in the Monitor Menu
displayed by the programmer.
SPEED INPUT Speed reading.
THROTTLE Throttle reading, as % of full throttle.
BATTERY VOLTS Voltage at Logic Power (pin 4).
HEATSINK TEMP Heatsink temperature, in °C.
MODE Controller operating mode: Mode 1 or Mode 2.
ARM CURRENT Motor armature current, in amps.
FIELD CURRENT Motor field current, in amps.
ARM PWM Motor armature applied duty cycle, as %.
FIELD PWM Motor field applied duty cycle, as %.
FOOT INPUT Pedal interlock switch: on/off.
KEY INPUT Keyswitch: on/off.
FORWARD INPUT Forward switch: on/off.
REVERSE INPUT Reverse switch: on/off.
MODE SWITCH Mode switch: on/off.
AUX CONTACTOR WalkAway™ relay or EM brake at pin 23: on/off.
MAIN DRIVER Main contactor driver: high/low.
APPENDIX B: PROGRAMMING DEVICES & MENUS
B-4