Quick Guide

13
7. Charging instructions
During use, the camera needs to be charged when the low battery
indicator shows or the App pushes
low battery message.(NOTE: DC5V
power adapter is not included in
package.Please use your phone
charger.)
1. Insert the power supply into the USB port of the camera.
2. When charging, the green indicator light of the camera will be
continuous blinking. You can also confirm the charging status by the
charging icon.
At the position of the arrow of
the USB port, be careful not
to remove the entire silicone
pad, only the rubber pad of
the USB port.
If there is a solar panel, pay attention to the orientation of the solar panel
when installing it, and use the best
position where you can get the most
sunlight every day. The installation
angle should be tilted a little, do not
lay flat to avoid water or snow
accumulation.