Quick Guide

12
6. Installation
Surveillance Area: When installing the camera, the PIR sensor should
not be vertically aligned with the moving objects, as it may not sensitive to
movement. It is recommended that the camera be tilted more than 15
degrees to capture motions.
Notice: PIR sensor is sensitive to hot and cold air flow.
 Avoid installing the camera at a place where airflow is stirred up.
For example: the air outlet of the air conditioner, the cooling vent of
equipment, locations next to fans or curtain, etc.
 Do not install the camera directly against glass or mirror.
 The installation height of the camera should be about 8-10 feet.
 Do not install the camera upside down.
Installation: Install the camera on the wall.Put the sticker on the wall,
punch holes and then nail the rubber plugs.Screw on
the camera bracket and adjust the camera tilt angle.