WS2305U (CSJ18W) 20V Max Jig Saw 2 EN
4 3 2 5 1 6 13 12 11 14 10 9 8 7
Fig.B1 Fig.A 1 2 Fig.C Fig.B2 T-type Shank C 15 Fig.E1 Fig.D 2 1 Fig.E2 Fig.
Fig.E3 Fig.E2 2 1 Fig.E4 Fig.F 8 Fig.G1 Fig.G2 Fig.H1 Fig.H2 Fig.I1 Fig.
PRODUCT SAFETY WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: •Lead from lead-based paints; •Crystalline silica from bricks and cement and other masonry products; •Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
connected and properly used. Use of dust collection can reduce dust-related hazards. h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
SAFETY WARNINGS FOR BATTERY PACK a) Do not dismantle, open or shred battery pack. b) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight. c) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear eye protection Wear ear protection Wear dust mask COMPONENT LIST 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Lock-off button On/off switch Hand grip areas Battery pack release button Battery pack Vacuum adapter Base plate Angle plate Pendulum action control Roller guide Saw blade Tool-free blade holder Contact prevention guard Led light Allen key (See Fig.
ACCESSORIES Allen key Charger (WS9924U) Battery pack (WS9970) Dust adapter 10pcs blade box 21TPI BIM Metal cutting blade 8TPI HSS Aluminum cutting blade #50 65Mn Ceramics blade 10TPI HCS Wood cutting smooth blade 6TPI 65Mn Wood cutting scroll blade periods of time, charge the battery every 3-6 months. 1 1 1 1 1 2 2 2 2 2 We recommend that you purchase your accessories listed in the above list from the same store that sold you the tool. Refer to the accessory packaging for further details.
saw blade (11). You can only use the blade type shown in Fig E1. Don’t use other blade types. Inserting the saw blade To open the blade holder (13) rotate the blade holder ring anti-clockwise (Jigsaw upside down) and hold in position. Then fully insert the blade (11) into the blade holder slot with blade teeth facing forward and release the ring, which will self rotate and clamp over the top of the blade (See Fig E2). Push the blade into the blade holder again to ensure it is locked in position.
not force the cutting blade when cutting thin metal or sheet steel, as they are harder materials and will take longer to cut. Excessive blade force may reduce the life of the blade or damage the motor. To reduce heat during metal cutting, add a little lubricant along the cutting line. MAINTENANCE Remove the battery pack from the tool before carrying out any adjustment, servicing or maintenance. There are no user serviceable parts in your power tool.
