User manual

10
EN
WARNING: Never change the direction of
rotation when the chuck is rotating, wait until
it has stopped!
5. FULLY AUTOMATIC SPINDLE LOCKING (AUTO-LOCK)
(SEE FIG. E)
The chuck of the screwdriver is locked when either
forward rotating on/off switch or reverse rotating on/off
switch is not pressed. This allows the driver to be used
manually when needed.
6. USING THE LED LIGHT
To turn on the LED light, simply press either forward
rotating on/off switch or reverse rotating on/off switch.
When you release the forward rotating on/off switch or
reverse rotating on/off switch, the LED light will be off.
LED lighting increases visibility-great for dark or enclosed
area.
7. PROTECTION AGAINST DISCHARGING
The Li-ion battery is protected against discharging by
the “Discharging Protection System”. When the battery
is depleted, the driver is switched off by means of the
protective circuit: The chuck no longer rotates. When this
occurs, you need to recharge the battery.
PROBLEM SOLUTIONS
1. BATTERY WILL NOT CHARGE?
Charger not plugged into a working outlet. Plug charger
into a working outlet. Check current by plugging in a lamp.
Surrounding air temperature is too hot or too cold. Move
charger to an appropriate place which temperature is
suitable for the charger.
2. DRIVER STOPS DURING DRIVING SCREWS. WHY?
Driver battery is out of power. Make sure the driver is fully
charged before using it.
MAINTENANCE
Remove the battery pack from the tool before carrying
out any adjustment, servicing or maintenance.
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your power
tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
For Battery tools
The ambient temperature range for the use and storage of
tool and battery is 0
o
C (44.6
o
F)-45
o
C (113
o
F).
The recommended ambient temperature range for the
charging system during charging is 0
o
C (44.6
o
F)-40
o
C
(104
o
F).
STORAGE AND TRANSPORTATION
Store the screwdriver and the accessories in a dry, clean
place which is protected from the effects of weather
and temperature and is out of the reach of children and
animals.
For transportation in vehicles, secure the product against
movement or falling to prevent injury to persons or damage
to the screwdriver
FCC Part 15
Supplier’s Declaration of Conformity
Product Description: Battery charger
Model Number: XZ0500-0600W
Trade Name: WESCO
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Responsible Party :
Positec USA, Inc.
10130 Perimeter Parkway, Charlotte, NC 28216 USA
Tel.: [phone]
Fax: [phone]