WS2013U (CSD36G3) 4V Li-Ion Screwdriver 2 EN
1 2 3 4 10 5 9 8 7 6
Fig.A1 Fig.A2 Fig.A3 Fig.B1 Fig.B2 Fig.B3 Fig.B4 Fig.B5 Fig.B6 FORWARD REVERSE Fig.B7 Fig.C Fig.D1 Fig.D2 Fig.D3 Fig.
PRODUCT SAFETY WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks and cement and other masonry products； • Arsenic and chromium from chemically-treated lumber.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.
SAFETY WARNINGS FOR BATTERY CELLS INSIDE THE TOOL a) Do not dismantle, open or shred cells. b) Do not expose power tool to heat or fire. Avoid storage in direct sunlight. c) Do not short-circuit charging terminal. Do not store power tool haphazardly in a box or drawer where charging terminal may short-circuit each other or be short-circuited by conductive materials.
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Li-Ion battery, battery must be recycled Do not burn Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste. POSITEC Inc. has established a partnership with the RBRC Corporation to recycle any Positec batteries with the RBRC-call2recycle seal.
COMPONENT LIST 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Screwdriver bit Chuck Bit cartridge Top slide cover Soft Grip Handle Battery charging socket Charging indicator light Reverse rotating on/off switch Forward rotating on/off switch LED light Charger Top bit window (See Fig. B2) * Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA Battery voltage 4V No load speed Max** 180/min Max torque 31.0 in-bls (3.5N.m) Chuck size 1/4’’ hex Machine weight 1.
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The power tool is intended for driving in and loosening screws. Inspect the screwdriver before using to ensure all parts are running smoothly and there are no abnormal sounds or sparks. Before driving fasteners, check behind walls for wires, other electrical hazards or plumbing. Clear the work area of all parts and debris that may cause injury by flying objects.
WARNING: Never change the direction of rotation when the chuck is rotating, wait until it has stopped! 5. FULLY AUTOMATIC SPINDLE LOCKING (AUTO-LOCK) (SEE FIG. E) The chuck of the screwdriver is locked when either forward rotating on/off switch or reverse rotating on/off switch is not pressed. This allows the driver to be used manually when needed. 6. USING THE LED LIGHT To turn on the LED light, simply press either forward rotating on/off switch or reverse rotating on/off switch.
