User manual

WESAUDIO
4/9/18
_HYPERION USER MANUAL REV1
32
9.4. Memories
Parameter storage could be summarized like this:
- _HYPERION unit has TWO separate fast presets which can be triggered via A/B buttons.
- _HYPERION plugin can store UNLIMITED number of configurations, when each preset can
contain THREE instant configuration changes (A/B/C – fast presets).
9.4.1. Synchronization upon connection
When new plugin instance is loaded into DAW, its state is unmodified, that means that no
parameters are yet modified. When user will initiate connection to hardware unit by setting Connection
ID, Plugin will download current state of parameters from the unit including any available fast
configuration presets. So for instance, if connection between _HYPERION plugin and _HYPERION
hardware will be triggered, and plugin will be in unmodified state, all parameters states will be
downloaded to the plugin, including _PRESET_A and _PRESET_B states.
9.4.2. Memory synchronization between plugin and hardware
In general there two modes of operation which can be modified through
GConManager/_SETTINGS application: synchronization enabled, and synchronization disabled.