User manual

WESAUDIO
4/9/18
_HYPERION USER MANUAL REV1
31
9.3.2. Direct output
WesAudio devices and plugin management functionalities are perfect solution for hybrid mixing,
when on some stage signal is sent to the analog world and summed outside DAW. In that approach:
3) Connect your HW with your machine using USB cable and USB 2.0+ port in your workstation
(**) or _Titan rack frame.
4) Insert on your track WesAudio plugin which matches with your HW and select your device from
drop down list.
5) Set up track/aux output to audio interface output which routes signal to the WesAudio device.
From now on you can use automation and recall features in analog domain!
** PLEASE NOTE: Officially supported interface is USB 2.0 – please check your USB HUB to be
compatible with this particular USB revision.