User manual

WESAUDIO
4/9/18
_HYPERION USER MANUAL REV1
20
This mode allows “true” dual-mono operation which is perfect for processing two mono sources (e.g.
kick and snare). In fact in this mode each channel can be treated as separate hardware unit.
Channels modes description:
 Unlinked mode (4) – this mode means that LEFT/MID and RIGHT/SIDE channel is completely
independent from each other, to change parameter value in this mode:
o Using front panel - it is necessary to select a channel, and then change a parameter, and only
selected channel configuration will be affected.
o Using Stereo plugin – each channel is easily accessible.
o Using Mono plugin – Mono plugin can change only its currently connected (paired) channel.
 SW Linked mode (5) – Active only for Stereo mode in Stereo plug-in - In this mode both channels are
linked relatively (please check Stereo mode chapter for more details).
 Unlinked mode/SW Linked mode (6) – This behavior is available only for Mid-Side mode – by default
by activating Mid-Side mode, both channels (MID and SIDE) are unlinked. However, we can still link
those channels anytime (relatively) by activating “Channel link button” (picture below). This might be
useful if we would like to still change some settings for both channels at the same time, or to check
our changes by toggling band bypass buttons.