User manual

WESAUDIO
4/9/18
_HYPERION USER MANUAL REV1
19
Management modes define how unit responds to A/B buttons and Bypass button, there are following
options:
 Global Mode (1) – each time either A/B or Bypass is pressed, both channels are affected regardless
currently selected channel. Those functions works in global mode.
Channels modes description:
 Unlinked mode (2) – this mode means that LEFT/MID and RIGHT/SIDE channel is completely
independent from each other, to change parameter value in this mode, it is necessary to select a
channel, and then change a parameter, and only selected channel configuration will be affected.
 HW Linked mode (3) – this is special mode active only in standalone operation when stereo mode is
active. It means that currently selected channel becomes master channel and all its parameters are
applied to both analog channels (That is why both channels buttons are marked as selected). In
essence, it means that each time parameter is changed through front panel, both analog circuits (for
both channels) will be affected exactly the same way. However what is important, that only currently
selected channel memory is really affected (to prevent unwanted channel memory copy upon hitting
Stereo button). When channels will be unlinked after modifications in Stereo mode (either by
enabling Dual mono or Mid-Side modes), channel which hasn’t been currently selected, will go back
to its previous memory state. To learn how to copy channels using unit’s front panel, please refer to
chapter Front panel – special functions.
7.2. Unit with a plug-in usage
This chapter describes how unit behaves when it is connected to a plug-in.
Plugin type
Mode
A/B and Bypass
Channels
Stereo
Dual mono
Global mode (2)
Unlinked mode(4)
Stereo
Stereo
Global mode (2)
SW Linked mode (5)
Stereo
Mid-Side
Global mode (2)
Unlinked mode/SW Linked
mode(6)
Mono (1)
Dual mono
Split mode (3)
Unlinked mode (4)
(1) IMPORTANT NOTE: MONO plugin upon connection will always activate “Dual” mode. This
plugin can work only in that mode.
Management modes define how unit responds to A/B buttons and Bypass button, there are following
options:
 Global Mode (2) – each time either A/B or Bypass is pressed, both channels are affected regardless
currently selected channel. Plug-in doesn’t contain separate buttons (A/B and bypass) for each
channel.
 Split Mode (3) – Split mode is activated only when mono plug-in instance is connected to at least
one hardware channel. In this mode A/B and Bypass work completely independent for each channel.