User manual

WESAUDIO
4/9/18
_HYPERION USER MANUAL REV1
13
5. Specification
Short specification summary:
 Frequency response: 10Hz-150kHz (-2dB)
 THD+N all bands gain "0": 0.003% (1kHz,0dBu)
 THD+N +15dB band boost: <0.15% (1kHz,0dBu)
 Input impedance: 10kohm
 Output impedance: <100ohm
 Max signal level: +24dBu
 Crosstalk:< -100dB
 THD (MID switch): 1%
 THD (HIGH switch): 2.5%
 Power consumption: 150mA per rail
 Dimensions : 76x133x158mm
 Warranty: 2 years
 Unit needs to warm up for about 5 minutes before usage as its temperature may affect some
internal variables – like frequencies of each band, and very slightly gain and Q settings.
 Each band can boost or cut in configurable gain mode (It affects also OUTPUT control):
o 15dB boost or cut in 0.25 dB steps,
o 5dB boost or cut in 0.083 dB steps,
 Each frequency control has predefined amount of steps in logarithmic scale:
o HF frequency – 256 steps,
o HMF frequency – 256 steps,
o LMF frequency – 256 steps,
o LF frequency – 200 steps,
o HPF frequency – 128 steps.