User manual

How to Clear Blockages

• Low suction or pick up may be due to a

blockage in the system. Refer to the following

steps to check for blockages, continuing with

each step until the blockage is found.

MAINTENANCE

WARNING: ENSURE THE CLEANER IS NOT

CONNECTED TO THE MAINS POWER SUPPLY WHEN

PERFORMING ANY MAINTENANCE PROCEDURES.

Step 1: Unlock the neck on the Mini Hand Turbo

Brush by twisting anti-clockwise.

Step 2: Push the release buttons on the side of the

Mini Hand Turbo Brush down to unlock the external

bristles. Rotate this bristle attachment upwards.

Step 3: Remove the clear cover.

Hose/Wand Blockage

• Disconnect the powerhead and telescopic wand from handle.

• Plug vacuum in and turn it on. Check the hose end for suction. Remove

any obstructions.

• If there is no blockage in the hose, remove the powerhead from the

telescopic wand and attach the wand to the hose.

Mini Hand Turbo Brush