USER INSTRUCTIONS BASELINETM SELF RETRACTING LIFELINES Complies with the ANSI Z359.14 standard and OSHA 29 CFR 1910 and 1926 regulations. BASELINE™ WARNING! Compliant fall protection equipment must only be used as it was designed and adhere to the hierarchy of controls as discussed in ANSI Z359.2. Users MUST read and follow all user instructions provided with the product. Before using a fall arrest system, users must be trained in the safe use of the system, as required by OSHA 29 CFR 1910.30 and 1926.
GENERAL SAFETY INFORMATION These User Instructions are not to be removed except by the user of this equipment. Current User Instructions must always be available to the user. WARNING! 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Failure to follow all instructions and limitations on the use of Self-Retracting Lifelines (SRL) may result in serious personal injury or death.
PURPOSE Self-Retracting Lifelines are designed to be used as part of a complete personal fall arrest system. USE INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Failure to follow all instructions and limitations on the use of the SRL may result in serious personal injury or death. Before using a personal fall arrest system, employees must be trained in accordance with the requirements of OSHA 29 CFR 1910.30 and 1926.503 in the safe use of the system and its components.
5,000 pounds (22.2 kN) per employee attached, or shall be designed, installed, and used as part of a complete personal fall arrest system which maintains a safety factor of at least two; and under the supervision of a “qualified” person. ANSI Z359.2 states that anchorages selected for fall arrest systems must have a strength capable of sustaining static loads, applied in all permitted directions by the system: A) no less than 5,000 pounds (22.
WARNING! Striking objects horizontally due to the pendulum effect of a swing fall may cause serious injury or death. SWING FALL HAZARD SWING FALLS To minimize the possibility of a swing fall, anchor as directly above the work area as possible. Striking objects horizontally, due to the pendulum effect, may cause serious injury. Swing falls also increase the vertical fall distance of a worker, compared to a fall directly below the anchorage connector.
CLEARANCE CALCULATIONS Self Retracting Lifeline Maximum Arrest Distance 2 ft. (0.6 m) 1 ft. (0.31 m) Harness Stretch To Worker’s Back D-Ring 5 ft. (1.5 m) Required Clearance 5 ft . (1.5 m) Working Level Safety Factor 2 ft. (0.6 m) Lower Level or Obstruction Total Estimated Distance 10 ft . (3.0 m) Self Retracting Lifeline Maximum Arrest Distance 3.5 ft. (1.0 m) (per OSHA & ANSI Z359.14) 1 ft. (0.31 m) Harness Stretch Working Level Lower Level or Obstruction To Worker’s Back D-Ring 5 ft. (1.
PERFORMANCE FOR R530007(-R,-SR), R530011(-R,-SR) AND R531007(-R,-SR) Standards and Regulations Maximum Arrest Distance Free Fall Limit Maximum Arrest Force Average Arrest Force Capacity ANSI Z359.14 SRD Class 1 24 in (610 mm) 2 ft (0.6 m) 1800 lbs (8 kN) 900 lbs (4 kN) 130 - 310 lbs (59 - 141 kg) OSHA 29 CFR 1910.140/1926.502 42 in (1067 mm) 2 ft (0.
INSPECTION Type Of Use Application Examples Conditions Of Use Inspection Frequency Competent Person Infrequent to Light Rescue and confined space, Good storage conditions, factory maintenance indoor or infrequent outdoor use, room temperature, clean environments Annually Moderate to Heavy Transportation, residential construction, utilities, warehouse Fair storage conditions, indoor and extended outdoor use, all temperatures, clean or dusty environments Semi-annually to annually Severe to Continuo
All components of the fall arrest system must be inspected. See User Instructions supplied with each product. CLEANING, MAINTENANCE AND STORAGE CLEANING Cleaning and maintenance may be performed by the user. The SRL may be wiped down with a mild detergent and clean water solution, and rinsed with a dampened clean cloth to remove detergent. The hardware can also be wiped down to remove grease or dirt with a clean dry cloth.
LABELS CONTINUED 10
LABELS CONTINUED Top view of SRL Serial # Manufacture Date 11
WernerCo Corporate Headquarters: 555 Pierce Rd, Suite 300, Itasca, IL 60143 888-523-3371 Toll Free • 888-456-8459 Fax PN124737-01 ©2021 Werner Co.
