Specification

FIBERGLASSSTEPLADDERS FOR WORKING AROUND ELECTRICITY. NON-CONDUCTIVE SIDE RAILS.
27
FIBERGLASSEXTENSION LADDERS FOR WORKING AROUND ELECTRICITY. NON-CONDUCTIVE SIDE RAILS.
TYPE IAA
DUTY RATING
TYPE IAA
DUTY RATING
375lbs.375lbs.
M7100-1SERIES Manhole Ladder7800SERIES Combination Step/Extension Ladder
††
LOAD CAPACITY PER SIDELOAD CAPACITY
Universal brackets used
for mounting of V-rung
Protective, mar-resistant
rubber covered molded
end caps
Heavy gauge steel bracket engages steel
pin to lock section in stepladder position
Fixed
aluminum
locks with
bearing
plates to
distribute
load on
rung
Padded
V-rung
Extra large feet with
ribbed rubber pads
Wall bumper
surface
protector
Plate and rung
assembly are
riveted at four
points to each
side rail to
allow for rung
replacement
Nylon coated rung wear sleeves and
guides increase ease of operation
Slip-resistant
Traction-Tred
®
round rungs
Model
7807
††Designed for one or two person jobs. Note: When used as a double stepladder, the maximum
load per side, including person and materials, shall not exceed the duty rating of ladder.
Model
No.
Stepladder
Size
Width at
Flared Base
(outside rails)
Stepladder
Spread to
Outside
of Shoes
Length of
Ladder in
Closed
Position
Extended
Ladder
Working
Length
Approx.
Cu. Ft.
Per
Unit
Approx.
Shipping
Wt. Lbs.
7806 6' 23-1/4" 46-1/2" 72-3/4" 9-1/2' 8.6 33.5
7807 7' 24-1/4" 53-1/2" 84-3/4" 11-1/2' 10.3 37.0
7808 8' 25-1/4" 60-1/2" 96-3/4" 13-1/2' 12.1 40.5
SPECIFICATIONS
Parallel Section Flared Section
Overlap 3' —
Rails: 3-1/8" wide 3-1/8" wide
Flange: 1-3/16" wide 1-3/16" wide
Ladder Width: 14-1/2" outside rails 14-1/2" outside rails at top
Ladder in Closed Position: — 7-7/8" deep
DIMENSIONS
Exclusive
Alflo
®
rung
joint means
Twist-Proof
®
performance
Exclusive
Alflo
®
rung
joint means
Twist-Proof
®
performance
Model No. Total Length Approx. Cu. Ft. Per Unit Approx. Shipping Wt. Lbs.
M7108-1 8' 3.0 20.0
M7110-1 10' 3.7 24.0
M7112-1 12' 4.4 28.0
M7114-1 14' 5.2 32.0
M7116-1 16' 5.9 39.5
SPECIFICATIONS
Rails: 3-5/16" wide Rungs: 1-1/4"
Flange: 1-3/16" wide Ladder Width: 12-3/8" outside shoes
DIMENSIONS
Slip-resistant
Traction-Tred
®
round rungs
Mar-resistant,
vinyl coated
aluminum hoop
end caps for
removing ladder
from manhole
3’ replaceable
plastic sleeves
to avoid manhole
rim damage to rail
Combination rail
shield and shoe
protects bottom of
rail from damage
Model M7108-1