Product Manual A

Page 9
ENGLISH
ENERGY ABSORBING LANYARDS
USER INSTRUCTIONS
iii. Web
WebAlert inspectable webbing with red internal bers or
elastic webbing
i. Standard length. 6 feet or 3 feet.
ii. Adjustable length with adjuster buckle added enabling
reduction in total lanyard length in situations of reduced
clearances.
iv. Cable
Cable is resistant to welding spatter, and vinyl coating
provides abrasion resistance and facilitates inspection of
damaged areas. Check for damage, kinks or broken strands.
2. Werner DeCoil Stretch
An elastic lanyard is a convenient 4 foot length at rest, keeping
the dangling legs from becoming a trip hazard, then stretching
to the normal 6 foot length for movement.
3. SoftCoil Internal Energy Absorbing Lanyard
Energy absorbing lanyards with no shock
pack. The Werner SoftCoil™ lanyards include
an INSPECT!™ impact indicator stitch. If this
stitch has been deployed the product should be
removed from Service. None of the “SoftCoil™”
lanyards are appropriate for tie-back use. Instead
use the appropriate DeCoil Tie-Back lanyard.
i. Single leg with a variety of hook options. The standard sized
hook, carabiner, or loop on the label end is always attached
to the harness’ dorsal (back) D-ring.
ii. Dual leg lanyards permit movement with 100 percent tie-
off. Available with a variety of hook options. Again always
connect to the dorsal (back) D-ring with the standard sized
hook, carabiner, or loop at the label end of the lanyard.