Product Manual A
ENERGY ABSORBING LANYARDS
USER INSTRUCTIONS
Page 13
ENGLISH
or any other workplace element that could damage this equipment
or prevent it from operating as intended.
f. Components/Subsystems
Before rst use, a qualied person should inspect and determine that
all components and subsystems are compatible and will perform
correctly when combined into a complete personal fall protection
system. Consult the information in these instructions, and if any
additional information is needed contact Werner Co. directly.
g. Care and Storage
Product can be cleaned using a mild laundry detergent in warm or
cold water and air dried. Store in a cool, dry place, protected from
exposure to any direct light.
V. Labels/Identication/Inspection Records
a. All products should be inspected by the user thoroughly before
each use. Additional inspections by a competent person other than
the user should be conducted at intervals of no less than one year.
That interval should be shortened any time the product is used in a
harsh environment or is exposed to conditions such as chemicals,
abrasion, heat or any other factor that could affect the strength of
any of the materials or components.
b. The lanyard labels provide an inspection grid to record these
inspections by a competent person. Use a punch or permanent
marker to record those dates.
c. This manual should always accompany the product or be on le with
the employer for access when needed. Record the identication
details for the lanyard and record the inspections in the inspection
log. It is important to keep this log current, complete, and available
as needed.