Product Manual

SOFT ANCHORAGE CONNECTOR
USER INSTRUCTIONS
Page 5
ENGLISH
1. Verify the condition of each component. If any damage or
abnormalities are found the equipment should be removed from
service.
2. Check the webbing for cuts, abrasion, burns, welding spatter, or
discoloration that could be caused by chemical exposure.
3. For cable legs examine the entire length for any breaks, and the
swaged ttings for any irregularities.
4. Check all stitching for any broken threads.
5. Check all hardware for cracks, bends,
irregularities, corrosion, or sharp edges.
Check the snap hook gates for proper
smooth operation. The engagement
release for the hook’s gate is visible for
inspectability. Ensure the mechanism is
undamaged and functioning correctly.
6. Verify that all labels are intact, in place, and legible.
If abnormalities are found in
any of these areas, then the
competent person should be
consulted to determine if that
item is safe for continued use
or if it should be removed from
service.
INAPPROPRIATE CONNECTIONS
A. B.
C.
D. E. F.
NO! NO! NO! NO!
NO!NO!NO!NO!
PROPER CONNECTIONS