Specification

IS0002 Rev A ©2018 Werner Co. 08/18
Inspection Sheet
WERNER CO. CORPORATE HEADQUARTERS: 93 Werner Rd., Greenville, PA 16125-9499
TEL: [phone] FAX: [phone] www.wernerco.com
Lanyard
Hardware
All hardware must be free of cracks, sharp edges, deformation, corrosion, or any evidence of defect.
Pass
Remove From Service
Cracks Sharp Edges Deformation Corrosion
Chemical Attack Wear Alteration Excessive Heating
Comments: ___________________________________________________________________________________________
Pass
Remove From Service
Labels
All markings must be legible and attached to the product.
Illegible Missing
Comments: ___________________________________________________________________________________________
Snap hooks / Carabiners
Snap hooks and carabiners on product must be able to self-close and lock. All hardware must be free of cracks, sharp edges,
deformation, corrosion, or any evidence of defect.
Pass
Remove From Service
Does Not Close Cracks Deformation Corrosion
Does Not Lock Sharp Edges Alteration Load Indicator Warning
Comments: ___________________________________________________________________________________________
Chain
Chain must be free from wear, nicks, cracks, breaks, gouges, stretch, bend, and discoloration from excessive temperatures.
Pass
Remove From Service
Wear Cracks Gouges Bent
Nicks Breaks Stretched Excessive Heating
Comments: ___________________________________________________________________________________________