Specification

FALL PROTECTION
ACCESS A HIGHER STANDARD.™
Concrete Hybrid Anchor
Easily insert and remove from
pre-drilled 3000 psi concrete
REUSABLE ANCHOR
HEAVY-DUTY SWIVEL TOP
DRILL HOLE 1" X 5" DEEP
A510002
10K Mega-Swivel
Concrete Anchor
Easily insert and remove
from pre-drilled 3000 psi
concrete, Minimum 5"
concrete thickness
HEAVY-DUTY SWIVEL TOP
DRILL HOLE 3/4" X 4.5" DEEP
A510001
10K REPLACEMENT
CONCRETE BOLTS/10 PK
A510004
Reusable Concrete Anchor
Easily Insert and Remove from Pre-drilled 3000 psi Concrete
Toggle Bolt Anchor
Reusable Anchor for Hollow Core Concrete and for Steel Beams
DRILL HOLE 3/4"
A410000
Pour-In Disposable Anchor Strap
Loop, D-Ring, Pack of 25
Pour-In Disposable Anchor Strap
Loop, Loop, Pack of 25
Parapet Wall Anchor
14.5" MAXIMUM WALL THICKNESS
A567000
Straight Loop Insert Anchor
Easily to use, permanent anchor
system for cast in place
STRAIGHT LOOP
INSERT ANCHOR/25 PK
A510021
SWIVEL STRAIGHT LOOP BOLT
A510022
STRAIGHT LOOP BOLT
ASSY/25 PK
A510023
CONCRETE
DRILL HOLE 3/4" X 3" DEEP
A510000 5,000lbs
DRILL HOLE 1" X 4.5" DEEP
A510010 10,000lbs
24" LENGTH
A211002
36" LENGTH
A211003
48" LENGTH
A211004
72" LENGTH
A211006
36" LENGTH
A211103
48" LENGTH
A211104
72" LENGTH
A211106
ANCHORS
I-Beam Trolly Anchor
Lightweight aluminum design for
smooth travel along beam
FITS BEAMS
3" - 10" < 7/8" THICK
A450000
I-Beam Sliding Anchor
Lightweight aluminum design
Builders Grip
FITS HOLE
3/4" - 1 1/4" DIAMETER
MAXIMUM 1 1/4"
THICK MATERIAL
A420000
Fixed Beam Anchor
I-BEAM/STEEL
FITS BEAMS 3.5" - 14"
< 1.25" THICK
A550000
FITS BEAMS 12" - 30"
< 2.5" THICK
A550030
FITS FLANGES 4" - 14"
< 7/8" THICK
A460000
D-Bolt Anchor
Integrated bolt with washer and nut m
1/2" STUD DIAMETER
MAXIMUM 1" THICK MATERIAL
A320002
D-Bolt Anchor
For 5/8" diameter fastener
(not included)
A320001
Hand Grip Anchor
4" WIRE
A100204
Mega-Swivel Steel Anchor
Swivel Top Design
DRILL HOLE 5/8"
MINIMUM 1/4"
THICK STEEL
A320003
REPLACEMENT
STEEL BOLTS
10/PK
A320004
Bull Ring Anchorage Connector ROOF APPLICATION
A216400
FEATURES
•
Made with zinc plated steel
• Minimum Bbreaking Strength (MBS): 5,000 lb
• 2 inch connector ring
• Use on wood structures with a minimum thickness
of 3 inches
• Use only with three (3) 1/4" x 3" zinc-plated
steel hex head lag screws or six (6) 16D 3 inch
8 gauge spiral nails (sold separately)
FEATURED PRODUCT
SPECIFICATIONS
MINIMUM BREAKING
STRENGTH (MBS)
WIDTHLENGTHMATERIALMODEL NO.
APPROX.
WEIGHT
COMPLIANCE
STANDARDS
3 in
(76 mm)
2 in
(51 mm)
5/16 in (8mm) Lag
2/16 in (5mm) Nail
9 in
(229 mm)
Zinc Plated
Steel
ANSI Z359.18-2017 Type A
OSHA 1910 & 1926
A216400
5,000 lbs
(22.2 kN)
9.5 oz
(268 g)
CONNECTION
SIZE
HOLE
DIAMETER
D-Ring Anchorage Connector STEEL APPLICATION
A330000
FEATURES
•
Made with alloy and stainless steel
• Minimum Breaking Strength (MBS): 5,000 lb
• 2-3/8 inch D-ring
• Use only on steel with a minimum thickness
of 1/4 inch (6.4 mm)
• Use only with a 5/8" - 11 Grade 5 steel hex
head bolt and nut (sold separately)
SPECIFICATIONS
MINIMUM BREAKING
STRENGTH (MBS)
WIDTHLENGTHMATERIALMODEL NO.
APPROX.
WEIGHT
COMPLIANCE
STANDARDS
3-1/8 in
(80 mm)
2-3/8 in
(61 mm)
5/8 in
(17 mm)
6 in
(154 mm)
Alloy Steel
Stainless Steel
ANSI Z359.18-2017 Type A
OSHA 1910 & 1926
A330000
5,000 lbs
(22.2 kN)
9.5 oz
(268 g)
CONNECTION
SIZE
HOLE
DIAMETER