Datasheet
The Joker’s holding function means that
nuts and bolts can be held in the jaw and
easily positioned where they are needed.
Fastening on to the thread can then be
done quickly and safely, thanks to the
innovative special stop-plate which
holds the fastener. No more time-wast-
ing searches for dropped nuts and bolts!
After applying and positioning the nut or
bolt, fastening can begin immediately –
no additional tools required.
The Joker’s clever double-hex geometry
delivers a very positive connection with
nuts or bolts – it’s a perfect fit. And the
exchangeable, hardened metal gripping
plate in the Joker’s mouth literally bites
itself into the bolt, with its extremely
hard tips. Both features combine to
prevent slipping, even at higher torque.
Constant re-positioning of the wrench?
Diculty holding fasteners in confined
spaces? Easing o to avoid any risks
of injury or fastener damage? That was
yesterday. Today, the Joker prevents
slipping o of the fastener head with its
integrated limit-stop – no longer is the
thumb needed to act as a depth stop.
This makes applications much easier
and allows signifi cantly more force to
be applied during fastening jobs.
Joker open-ended wrench
When we began to think about open-ended wrenches, we asked ourselves: why does the wrench
always have to be flipped over; why does it have an oset design; why does it slip o injuring fingers?
The new design of the mouth resulted in a real “Joker” that works even when all other trumps have
been played.
190