Bit-Checks Impaktor For an above-average service life Bit-Check 30 Impaktor 1 DIAMOND IMPACT PROOF HEX-PLUS TAKE IT EASY TOOL FINDER Bit-Check 10 Impaktor 1 DIAMOND 1 Impaktor holder with retaining ring and ring magnet in the chuck for a secure fit of the bits in the holder, 29 Impaktor bits. IMPACT PROOF HEX-PLUS TAKE IT EASY TOOL FINDER 1 Impaktor holder with retaining ring and ring magnet in the chuck for a secure fit of the bits in the holder, 9 Impaktor bits.
Tip Bit-Check 10 Impaktor 4 IMPACT PROOF DIAMOND IMPACT PROOF TAKE IT EASY TOOL FINDER Impaktor-Bits Impact-Bits are needed when a strong power tool (e.g. 18 volt impact screwdriver) is used. Impact bits were specifically developed to withstand high power tool forces. 1 Impaktor holder with retaining ring and magnet in the chuck for a secure fit of the bits in the holder, 9 Impaktor bits.
Bit-Checks Impaktor For an above-average service life Bit-Check 6 Impaktor 1 DIAMOND IMPACT PROOF Bit-Check 6 PH Impaktor 1 TAKE IT EASY TOOL FINDER DER DIAMOND 6 Impaktor bits. IMPACT PROOF TAKE IT EASY TOOL FINDER DER 6 Impaktor bits.
Bit-Checks Stainless Keep rust at bay Bit-Check 30 Stainless 1 INOX STAINLESS HEX-PLUS RAPIDAPTOR TECHNOLOGY TAKE IT EASY TOOL FINDER 1 Rapidaptor stainless steel bit holder with quick-release chuck, 29 stainless steel bits. Bit-Check 10 Stainless 1 INOX STAINLESS RAPIDAPTOR TECHNOLOGY TAKE IT EASY TOOL FINDER 1 Rapidaptor stainless steel bit holder with quick-release chuck, 9 stainless steel bits.
Tip Bit-Check 6 Stainless 1 SB INOX STAINLESS INOX STAINLESS Stainless Steel Bits The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. TAKE IT EASY TOOL FINDER 6 stainless steel bits.
Bit-Checks / Bit-Safes BiTorsion BiTorsion – Distinct extension of service life Bit-Safe 61 BiTorsion 1 DIAMOND HEX-PLUS RAPIDAPTOR TECHNOLOGY Bit-Check 30 BiTorsion 1 TAKE IT EASY TOOL FINDER RAPIDAPTOR TECHNOLOGY TAKE IT EASY TOOL FINDER 1 bit holder Rapidaptor with quick-release chuck, 29 BiTorsion bits for long service life, tough, for universal use.
Tip Bit-Check 10 BiTorsion 1 RAPIDAPTOR TECHNOLOGY BiTorsion The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. TAKE IT EASY TOOL FINDER Both bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. 1 BiTorsion bit holder Rapidaptor with quick-release chuck, 9 BiTorsion bits for long service life, tough, for universal use.
Bit-Checks / Bit-Safes BiTorsion BiTorsion – Distinct extension of service life Bit-Check 10 BiTorsion 3 SB RAPIDAPTOR TECHNOLOGY Bit-Check 10 PZ BiTorsion 1 RAPIDAPTOR TECHNOLOGY TAKE IT EASY TOOL FINDER 1 BiTorsion bit holder Rapidaptor with quick-release chuck, 9 BiTorsion bits for long service life, tough, for universal use. TAKE IT EASY TOOL FINDER 1 BiTorsion bit holder Rapidaptor with quick-release chuck, 9 BiTorsion bits for long service life, tough, for universal use.
Tip Bit-Check 7 PZ BiTorsion 1 RAPIDAPTOR TECHNOLOGY BiTorsion The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. TAKE IT EASY TOOL FINDER Chuck-all The Rapidaptor quick-release chucks hold both ¼" bits as per DIN ISO 1173-C 6,3 (Wera series 1) and E 6,3 (Wera series 4). 1 bit holder Rapidaptor with quick-release chuck suitable, 6 BiTorsion bits for long service life, extra-hard.
Bit-Checks Diamond Bits with “bite” Bit-Check 30 Diamond 1 DIAMOND RAPIDAPTOR TECHNOLOGY TAKE IT EASY TOOL FINDER 1 bit holder Rapidaptor with quick-release chuck, 29 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit. Bit-Check 10 Diamond 1 DIAMOND RAPIDAPTOR TECHNOLOGY TAKE IT EASY TOOL FINDER 1 BiTorsion bit holder Rapidaptor with quick-release chuck, 9 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit.
Tip Bit-Check 7 Diamond 1 DIAMOND DIAMOND RAPIDAPTOR TECHNOLOGY BDC-Bits BDC-Bits are absolutely premium products. They have a softer BiTorsion zone which reduces the hardness of the shaft by about 20 % in comparison to the drive tip. This means that the peak loads that cause bit breakage and premature wear are absorbed in this zone – something which enhances the service life of the bits.
Bit-Checks Diamond Bits with “bite” Bit-Check 7 PZ Diamond 1 DIAMOND RAPIDAPTOR TECHNOLOGY Bit-Check 7 PH Diamond 1 TAKE IT EASY TOOL FINDER DIAMOND 1 bit holder Rapidaptor with quick-release chuck, 6 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit. 05057412001 RAPIDAPTOR TECHNOLOGY TAKE IT EASY TOOL FINDER 1 bit holder Rapidaptor with quick-release chuck, 6 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit.
Tip Chuck-all The Rapidaptor quick-release chucks hold both ¼" bits as per DIN ISO 1173-C 6,3 (Wera series 1) and E 6,3 (Wera series 4). Bit-Check 6 PH Diamond 1 DIAMOND TAKE IT EASY TOOL FINDER Single-hand All functions of the quick-release chuck such as the inserting or releasing of bits can be done with just one hand. That is faster, more economic and ergonomic. There are no unnecessary manoeuvres. 6 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit.
Bit-Checks / Bit-Safes Universal For general use Bit-Safe 61 Universal 1 HEX-PLUS Bit-Safe 43 Universal 1 RAPIDAPTOR TECHNOLOGY 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 42 bits, Torsion-style (T) design to reduce premature wear, tough, for universal use. 1 bit holder Rapidaptor with strong permanent magnet and quick-release chuck, 60 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use.
Tip Bit-Check 30 TX Universal 1 Torsion bits Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 29 bits, tough, for universal use.
Bit-Checks / Bit-Safes Universal For general use Bit-Check 10 Universal 3 Bit-Check 10 Universal 4 RAPIDAPTOR TECHNOLOGY 1 bit holder Rapidaptor with quick-release chuck, 9 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use.
Tip Chuck-all The Rapidaptor quick-release chucks hold both ¼" bits as per DIN ISO 1173-C 6,3 (Wera series 1) and E 6,3 (Wera series 4). Bit-Check 10 PZ Universal 1 MAGNETIC Single-hand All functions of the quick-release chuck such as the inserting or releasing of bits can be done with just one hand. That is faster, more economic and ergonomic. There are no unnecessary manoeuvres.
Bit-Checks / Bit-Safes Universal For general use Bit-Check 10 TX Universal 1 Bit-Check 7 Universal 1 1 bit holder with quick-release chuck, 9 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use. 1 universal bit holder with stainless steel sleeve and strong permanent magnet, 6 bits, tough (Z), for universal use.
Bit-Check 7 Universal 2 MAGNETIC Bit-Check 7 PZ Universal 2 MAGNETIC 1 bit holder with strong permanent magnet and quick-release chuck, 6 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use. 1 bit holder with strong permanent magnet and quick-release chuck, 6 bits, Torsion-style (T) design to reduce premature wear, extra-hard (H).
Bit-Checks / Bit-Safes Universal For general use Bit-Check 7 TX Universal 1 Bit-Check 7 Hex-Plus 1 HEX-PLUS 1 universal bit holder with stainless steel sleeve and strong permanent magnet, 6 bits, tough, for universal use. 05056294001 MAGNETIC 1 bit holder with strong permanent magnet and quick-release chuck, 6 bits, tough (Z), for universal use.
Tip TiN-Bits Bit-Check 7 TiN PZ Universal 1 SB TiN stands for titanium-nitrite. An extremely hard coating to withstand permanent loads such as during continual screwdriving operations in series manufacturing. 1 universal bit holder with stainless steel sleeve and strong permanent magnet, 6 bits, TiN coating for the hardness needed e.g. in series screwdriving operations.
Bit-Checks / Bit-Safes Universal For general use Bit-Check 6 Universal 2 Bit-Check 6 TX Universal 1 6 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use. 6 bits, tough (Z), for universal use.
Tip Bit-Check 6 TX HF 1 HOLDING FUNCTION 6 bits, holding function for TORX® socket screws made according to Acument Intellectual Properties specifications. 05056476001 867/4 TORX® 1 x TX 10x50; 1 x TX 15x50; 1 x TX 20x50; HF 1 x TX 25x50; 1 x TX 30x50; 1 x TX 40x50 HOLDING FUNCTION The HF profile In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost.
Bit-Checks Wood For wood applications Bit-Safe 61 Wood 1 Bit-Check 30 Wood 2 MAGNETIC 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 29 bits, tough, for universal use. 1 bit holder with strong permanent magnet and quick-release chuck, 60 bits, tough, for universal use.
Tip Bit-Check 12 Wood 2 RINGMAGNET Rapidaptor ring magnet The floating, free-turning sleeve on the Rapidaptor with powerful ring magnet securely holds even large and heavy screws. 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 11 bits, tough, for universal use.
Bit-Checks Metal For steel applications Bit-Check 30 Metal 1 Bit-Check 12 Metal 1 HEX-PLUS HEX-PLUS 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 29 bits, tough (Z), for universal use. 05057424001 05057434001 899/4/1 851/1 Z PH 855/1 Z PZ 867/1 TORX® 800/1 Z 840/1 Z Hex-Plus 410 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 11 bits, tough (Z), for universal use.
Bit Sets for Special Applications Screwdriving, Drilling, Tapping, Countersinking and Deburring 843 Stepped drill bits, 4-20 mm Construction: Drive: 05104672001 9 drill steps increasing by 2 mm for material with a max. thickness of 4.5 mm.
Bit Sets for Special Applications Screwdriving, Drilling, Tapping, Countersinking and Deburring 845/8 1-flute Countersink Bits Set 8 pieces in robust case 1 Kraftform 816 R Rapidaptor quick release bit holder; 1 universal holder 888/4/1 K Rapidaptor, nonmagnetic, suitable for power tools and electronic drills.
847/7 Set Combination Drill Bits Set 848 HSS Metal Twist Drill Bits RAPIDAPTOR TECHNOLOGY Application: For precise drilling in metal Construction: HSS 1 Drive: /4" hexagon, suitable for DIN ISO 1173-D 6,3 holders 7 pieces in robust case 1 Universal bit holder Rapidaptor 888/4/1 K with quick-release chuck suitable for power tools and electronic drills; combination drill bits, 1/4" drive, suitable for power tools with DIN ISO 1173-D 6,3 receiver.
Tip 849/855/867/18 Wood Twist Drill Bits and Bits Set DEPTH CONTROL Bit holder with adjustable depth stop The screw installation depth can be infinitely adjusted and allows the desired degree of countersinking of the screws. MAGNETIC 18 pieces in robust belt pouch 1 Universal bit holder Rapidaptor 889/4/1 K suitable for power tools and electronic drills; wood Twist Drill Bit and Bits, 1/4" drive, suitable for power tools with DIN ISO 1173-D 6,3 receiver.
