Datasheet

950/9 Hex-Plus Multicolour HF 1 L-key set, metric, BlackLaser, with holding
function, 9 pieces
Innovations and Autumn/Winter Campaign 2018/2019
Set contents:
950 SPKL Multicolour
05022600001 1 x 1,5 x 90 mm
05022602001 1 x 2 x 101 mm
05022604001 1 x 2,5 x 112 mm
950 SPKL HF Multicolour
05022200001 1 x 3 x 123 mm
05022201001 1 x 4 x 137 mm
05022202001 1 x 5 x 154 mm
05022203001 1 x 6 x 172 mm
05022204001 1 x 8 x 195 mm
05022205001 1 x 10 x 224 mm
With retaining function on long
arm
Hex-Plus Ball tip
We questioned the classic L-key
design, since all too often the
screw head recess is rounded out,
meaning screws can no longer be
tightened or loosened – and so the
user finds the L-key slipping out of
the recess. Wera Hex-Plus tools
have a larger contact surface in
the screw head. The notching
effects are reduced and thereby
the deformation of the screws. At
the same time, as much as 20 %
more torque can be applied.
The clamping of the screw is
achieved by a flexible locking ball.
The holding function is especially
helpful in confined, hard-to-reach
spaces, where there is no room for
a second hand to sec
Hexagon screws can endure a
problem because the contact
surfaces delivering the power from
the conventional tool, is
transferred to the screw via very
small surface areas. The
consequence: the screw can
become damaged (rounding out).
Hex-Plus tools have a greater
contact surface that prevents this
from happening! At the same time,
as much as 20 % more torque can
be applied. Good to know: Hex-
Plus tools fit into every standard
hexagon socket screw!
The spherical drive profile means
that it is possible to swivel the axis
of the tool to that of the screw,
and therefore enable angled,
“around-the-corner" screwdriving
jobs.
Web link
https://products.wera.de/en/l-keys_l-keys_for_hexagon_socket_screws_950_9_hex-plus_multicolour_hf_1.html
Wera - 950/9 Hex-Plus Multicolour HF 1
05022210001 - 4013288188403
Wera Werkzeuge GmbH
Korzerter Straße 21-25
D-42349 Wuppertal
Tel: +49 (0)2 02 / 40 45-0
E-Mail: [e-mail] 07.02.2020 - 2 / 3