Brochure

13
r
r
w
e
e
t
t
w
LIMIT
STOP
ANTI-SLIP
SMALL
ANGLE
30°
Integrated limit-stop
Constant re-positioning of
the wrench? Difficulty holding
fasteners in confined spaces?
Easing off to avoid any risks
of injury or fastener damage?
That was yesterday. Today, the
Joker prevents slipping off of
the fastener head with its inte-
grated limit-stop – no longer is
the thumb needed to act as a
depth stop. This makes applications much easier and allows signifi
cantly more force to be applied during fastening jobs.
Double-hex geometry
The Joker’s clever double-hex
geometry delivers a very
positive connection with nuts or
bolts – it’s a perfect fit. And the
exchangeable, hardened metal
gripping plate in the Joker’s
mouth literally bites itself into
the bolt, with its extremely hard
tips. Both features combine to
prevent slipping, even at higher
torque.
Holding function
The Joker’s holding function
means that nuts and bolts can
be held in the jaw and easily
positioned where they are
needed. Fastening on to the
thread can then be done quick-
ly and safely, thanks to the
innovative special stop-plate
which holds the fastener. No
more time-wasting searches
for dropped nuts and bolts! After applying and positioning the nut or
bolt, fastening can begin immediately – no additional tools required.
Small return angle
Instead of 60°, the Joker only
has a 30° return angle thanks
to it’s unique double-hex
design. Along with the Joker’s
straight neck, this means that
flipping the wrench has be-
come a thing of the past. With
the Joker, you can now loosen
and tighten nuts and bolts,
in situations where conven-
tional tools fail. Particularly in confined spaces, where conventional
open-jawed wrenches cannot be used. The combination of limit stop
and small return angle enables eff ective work, even on screw pipe
connections.