User`s guide

CHAPTER 4 - KEYPAD (HMI) OPERATION

Figure 4.2

- Direction of rotation (FWD/REV) LEDs

OFF

Flashing

Basic functions of the keys:

Starts the inverter via acceleration ramp.

Stops (disables) the inverter via deceleration ramp.

Also resets inverter after a fault has occurred.

Toggles the LED display between parameter number and its

value

(

number/value).

Increases the frequency, the parameter number or the

parameter value.

Decreases the frequency, the parameter number or the

parameter value.

Reverses the direction of motor rotation between Forward/

Reverse

Toggles between the LOCAL and REMOTE modes of

operation.

Performs the JOG functionwhen pressed. AnyDIprogrammed

forGeneral Enable (if any) mustbe closed to enable the JOG

function.

Thekeypadisusedforprogrammingand operatingthe CFW-08,

allowingthefollowingfunctions:

Indication of the inverter status and operation variables.

Fault indication and diagnostics.

Viewing and programming parameters.

4.2

USE OF THE

KEYPAD (HMI)

FWD/REV

Control

Selection

FWD / REV

HMI LED

Situation

Forward

Reverse

Forward