User`s guide

31
CHAPTER 3 - INSTALLATION
AND CONNECTION
When installing the CFW-08, free space around the inverter
must be left as indicated in figure 3.2.
Table 3.2 shows the
required free spaces.
Install the inverter in vertical position according tothe following
recommendations:
1)
Install the inverter on a flat surface.
2)Donotinstall heatsensitive components immediatelyabove
the
inverter.
ATTENTION!
When inverters are installed side by side, maintain the
minimum recommended distance B.
W
hen inverters are installed top and bottom, maintain the
minimum recommended distance
A + C and deflect the hot
air coming from the inverter below.
ATTENTION!
Provide independent conduits for signal, control and power
conductorsseparation(refer toitem 3.2 - ElectricalInstallation).
Useseparate conduits ortrunkingfor control and powerwiring
(see item 3.2 - Electrical Installation).
Figure 3.2
- Free spaces for cooling
3.1.3
Positioning and Fixing