User`s guide

25
CHAPTER 2 - GENERAL INFORMATION
CFW-08
0040
B
2024
E
O
_ _
_ _
_ _
_ _
_ _
_ _
Z
Rated Output
Current for:
220 to 240 V:
0016 = 1.6 A
0026 = 2.6 A
0040 = 4.0 A
0070 = 7.0 A
0073 = 7.3 A
0100 = 10 A
0160 = 16 A
0220 = 22 A
0280 = 28 A
0330 = 33 A
380 to 480 V:
0010 = 1.0 A
0016 = 1.6 A
0026 = 2.6 A
0027 = 2.7 A
0040 = 4.0 A
0043 = 4.3 A
0065 = 6.5 A
0100 = 10 A
0130 = 13 A
0160 = 16 A
0240 = 24 A
0300 = 30 A
Number of
phases of
the power
supply
:
S = single
phase
T = three
phase
B = single
phase or
three phase
Manual
Language:
P =
Portuguese
E = English
S = Spanish
Power
Supply
:
2024 =
200 to 240 V
3848 =
380 to 480 V
5060
(**)
=
500-600 V
Options:
S = standard
O = with
options
Degree of
Protection:
Blank
=
s
tandard
N1 = Nema 1
N4 = Nema
4X
(**)
Human
Machine
Interface:
Blank =
s
tandard
SI = without
interface
(with dummy
panel)
WEG Series 08
Frequency
Inverter
Control Board:
Blank =
standard
control
A
1
=
c
ontrol 1
(Plus Version)
A2
=
c
ontrol
2
(Plus Version
with Als +/-
10 V)
A3 = control 3
(Plus version
with CANopen
protocol)
(*)
A4 = control 4
(Plus version
with
DeviceNet
protocol)
(*)
A5 = control
5
(**)
(for
Multipump
application)
Special
Software:
Blank =
s
tandard
End Code
RFIFilter:
Blank =
s
tandard
FA =
Category
C2
RFI
filter
(internal or
footprint)
Special
Hardware:
Blank =
s
tandard
HOW TO SPECIFY THE CFW-08 MODEL:
NOTES!
The option field (S or O) defines if the CFW-08 is a standard version or if it will be equipped with any optional devices. If the
standard version is required, the specification code ends here.
The model number has always the letter Z at the end. For example:
CFW080040S2024ESZ = standard 4.0ACFW-08 inverter, single-phase at (200 to 240) V input, with manual in English.
If the CFW-08 is equipped with any optional devices, you must fill out all fields in the correct sequence up to the last optional
device, the model number is completed with the letter Z.
Thus, for instance if the product above is required with Nema 1 degree of protection:
CFW080040S2024EON1Z=
standard C
FW-08 inverter, 4.0A,single-phase,200-240V input,with manual in English language
and with kit for Nema 1 degree of protection.
(*)
-
The versions A3 and A4 of the control board shall be used only with the KFB-CO-CFW08 and with the KFB-DN-CFW08, respectively (refer to item 8.14 and 8.15). The parallel keypad, the
serial remote keypad, the parallel remote keypad, and the serial protocol (Modbus and WEG) cannot be used with these versions of the control board.
(**) -
For these models, contact WEG.