User`s guide

19
Thischapter defines the contents and purposes of this manu-
al and describes the main characteristics of the
CFW-08
frequency inverter. Identification, receiving inspections and
storage requirements are also provided.
This manual is divided into 9 chapters, providing information
to the user on how receive, install, start-up and operate the
CFW-08.
Chapter 1 -
Safetynotices.
Chapter 2 -
General information and receiving the CFW-08.
Chapter 3 -
RFI filters, mechanical and electrical installation
(power and control circuit).
Chapter 4 -
Using the keypad (Human Machine Interface -
HMI).
Chapter
5 -
Start-up and steps to follow.
Chapter
6 -
Setup and read only parameters detailed
description.
Chapter
7 -
Solving problems, cleaning instructions and
preventivemaintenance.
Chapter 8 -
CFW-08 optional devices description, technical
characteristics and installation.
Chapter 9 -
CFW-08 ratings, tables and technical information.
This manual provides information for the correct use of the
CFW-08. This frequency inverter is very flexible and allows
the operation in many different modes as described in this
manual.
Asthe CFW-08 can be applied in several ways, it isimpossible
to describe here all of the application possibilities.WEG does
not accept any responsibility when the CFW-08 is not used
according to this manual.
No part ofthismanual maybe reproduced in anyform,without
the written permission of WEG.
It is important to note the software version installed in the
CFW-08, since it defines the functions and the programming
parameters of the inverter.
This manual refers to the software version indicated on the
inside cover.For example,theversion3.0X appliesto versions
3.00 to 3.09, where “X” is a variable that will change due to
minor software revisions. The operation of the CFW-08 with
these software revisions are still covered by this version of
themanual.
The software version can be read in the parameter P023.
GENERALINFORMATION
2.1
ABOUT THIS
MANUAL
2.2
SOFTWARE
VERSION
CHAPTER 2