User`s guide

16
CFW-08 - QUICK PARAMETER REFERENCE
Display
Description
Page
E00
Output overcurrent/short-circuit
/output ground fault
141
E01
DC link overvoltage
141
E02
DC link undervoltage
142
E04
Overtemperature at the power heatsink
or in the
142
inverter internal air
E05
Output overload (Ixt function)
142
E06
External fault
142
E08
CPU error (Watchdog)
142
E09
Program memory error (Checksum)
142
E10
Keypad copy function error
142
E14
S
elf-tuning routine (estimation of the motor
142
parameters) error
E22,
E25
,
Serial communication error
142
E2
6 and E27
E24
Programming error
142
E28
Serial interface Watchdog timeout error
143
E31
Keypad connection fault (HMI-CFW08-RS)
143
E32
Motor overtemperature (external PTC)
143
E41
Self-diagnosis fault
143
II.Fault Messages
III. Other Messages
Display
Description
rdy
Inverter is ready to be enabled
Sub
Power supply voltage is too low for the inverter
operation (undervoltage)
dcbr
Inverterin DC braking mode
auto
Inverteris running self-tuning routine
copy
Keypad copy function in progress (only available in
the HMI-CFW08-RS) - inverter to keypad
past
Keypad copy function in progress (only available in
the HMI-CFW08-RS) - keypad to inverter
Srdy
Inverter in the sleep rdy mode