User`s guide

161
CHAPTER 8 - CFW-08 OPTIONS AND ACCESSORIES
Figure 8.21 -
Dimensions in mm [in] of the DeviceNet communication module
KFB-DN-CFW08
The figure below shows how to connect this module in a
DeviceNet network (this connection follows the DeviceNet
resolution).
NOTE!
Terminal 5 (GND) of the control board shall be grounded.
Figure 8.22
-
Connection possibilities for the KFB-DN-CFW08 module
ATTENTION!
This module can only be used with the drives that have the
“A4” initials in the intelligent code (refer to item 2.4 of this
manual). Otherwise,the DeviceNet communication as well
as the keypad will not work.
Itis notpossible to use the parallel keypad,the serial remote
keypad, the parallel remote keypad and the serial protocols
(such as ModbusandWEG)with version “A4” of the control
board.
42.6
[1.68]
5.6
[0.22]
57
[2.24]
25.3
[1.0]
3
6
.
8
[
1
.
4
5
]
CFW-08
Master
V+
V+
CAN_H
CAN_L
V-
CAN_H
CAN_L
V-
Shield
Shield
XC14