User`s guide

157
CHAPTER 8 - CFW-08 OPTIONS AND ACCESSORIES
Figure 8.16 a) and b)
- Insertion and removal of the serial communication module RS-232 KCS-CFW08
8.12
KSD-CFW08
The complete kit, that enables the connection of the CFW-08
to a PC via RS-232 contains:
-
Serial communication module RS-232 (KCS-CFW08);
-
3 m (9.8 ft) cable RJ-11 for the DB9;
-
Software SuperDrive that enables the CFW-08
programming, operating and monitoring. Refer to the
SuperDrive manual for hardware and system configurations.
8.11.1
Instructions for
KCS-CFW08
Insertionand Removal
- Connect the cable of the
communication module to XC5.
-
Place the communication module as
shown in figure above.
- Press it.
a) Insertion
- Use a screwdriver to unlock the communication module.
- Remove the module by pulling it on the lateral sides.
b)Removing
- Remove the cable of the XC5 connector.