User`s guide

155
CHAPTER 8 - CFW-08 OPTIONS AND ACCESSORIES
8.10
KDC-24V
-CFW08
24 Vdc power supply with HMI for the CFW-08:
This module makes it available a 24 Vdc power supply with
100 mA maximum current capacityand short-circuit protection.
The power supply reference (0 V - GND) is the same of the
terminal 5 on the control board.
The module also makes available a standard HMI in order to
set the CFW-08 frequency inverter.
Thisoptional moduleisinserted at the frontcoverof theinverter
in the place of the standard HMI (HMI-CFW08-P). For further
details on the installation of this optional module, refer to the
section regarding the installation of the KCS-CFW08 option
in this manual.
The 24 Vdc power supply polarity is indicated above the
terminals, according to the figure 8.14.
Figure 8.14
- Dimensions in mm [in] of the optional module KDC-24V-CFW08 and XC16 connector signals
Figure 8.13
- Dimensions in mm [in] of the optional module KDC-24VR-CFW08 and XC16 connector signals
36,8[1.45]
42,6[1.68]
11 [0.43]
57 [2.24]
20[0.79]
5,9[0.23]
36,8[1.45]
43,2 [1.7]
53,1[2.09]
10,9[0.43]
9[0.35]
57,6[2.27]
20[0.79]
6,1[0.24]