User`s guide

150
CHAPTER 8 - CFW-08 OPTIONS AND ACCESSORIES
8.3
HMI-CFW08-RP
External parallel keypad:
this keypad is mounted externally
to the inverters with Nema 12/IP54 degree of protection and
can be used in the following cases:
Applications that require a remote keypad (up to 10 m /
32.8 ft).
For theHMIinstallation ata paneldoor (0.12 in)orcommand
console.
For a better visualization on the display and to facilitate the
keypadoperation, when compared withthe parallel keypad
(HMI-CFW08-P).
Theexternal parallel keypad (HMI-CFW08-RP)must be used
with the MIP-CFW08-RP interface and CAB-RP-X cable.
Figure 8.4 -
Dimensions in mm [in] of the HMI-CFW08-RP
8.3.1
HMI-CFW08-RP
Installation
The HMI-CFW08-RPcanbeinstalleddirectlyonthe paneldoor
(0.12 in), as shown in the figures below:
Figure 8.5 -
Installation of the HMI-CFW08-RP
58
[2.28]
98
[3.86]
15.9
[0.63]
36.3
[1.43]
NOTE!
This optional is not compatible with the version “A3” and “A4”
of the control board. Refer to item 2.4 for further information
on these control boards.
52 mm
(2.05 in)
92 mm
(3.62 in)
M
a
x
.
3
m
m
(
0
.
1
2
i
n
)