User`s guide

149
CHAPTER 8 - CFW-08 OPTIONS AND ACCESSORIES
8.1
HMI-CFW08-P
Parallel keypad (HMI):
is the keypad that is mounted at the
front side of the inverter.
Figure 8.1
- Dimensions in mm [in] of the parallel HMI - HMI-CFW08-P
57
[2.24]
43
[1.69]
21
[0.83]
13
[0.51]
Figure 8.2 a) and b)
- Instructions for HMI-CFW08-P insertion and removing
8.2
TCL-CFW08
Dummy panel tobe inserted in theplace of the parallel keypad
(HMI-CFW08-P).
Figure 8.3
- Dimensions in mm [in] of the dummy panel TCL-CFW08
for the parallel HMI
8.1.1
Instruction for Insertion and Removing of the HMI-CFW08-P
1. Unlock the keypad byusing a screwdriver as
shown above.
2. Remove the keypad by pulling on the lateral
sides.
1. Place the keypad as shown above.
2. Press it.
b)Removing
a) Insertion
57
[2.24]
43
[1.69]
13
[0.51]