Product Manual

operating instructions
installation
The Trotter has passed a dynamic crash test done
with a 130 lb. front-facing occupant tested at 30
mph (48km/h). It was tested in accordance with
Annex A of ANSI/RESNA WC19.
1. Bus Transit Tie Downs should be used with
restraint systems that conform to SAE J2249
requirements.
2. Must be used in a vehicle equipped for for
ward-facing tie down during transport.
3. Remove mounted accessories; such as, trays
and respiratory equipment and secure
separately.
1. Insert two bolts in each bracket and then
through the black tapered washers.
2. Mount brackets at designated holes (A) on
Trotter frame.
3. Install black flat washer.
4. Install and tighten nut.
NOTE: The two front brackets mount on the
outside of the Trotter frame and the two rear
brackets mount of the inside of the Trotter frame.
All brackets should face outward.
A
A
A