Product Manual

installation
1. Insert headrest extension rods (1A) into sockets
(1B) on the back of the Trotter chair. If using in
conjunction with canopy, insert extension rods
in socket (2E) of canopy frame
2. Place rubber collars (1C) at desired height and
push headrest extension down until the rubber
stoppers reach the sockets.
adjustments
Height
Raise or lower the rubber collars on both headrest
extension rods to desired height.
Width
Headrest extension width must be adjusted to fit
each Trotter model.
1. Remove headrest cover (Fig 3A) by opening
Velcro™ flap.
2. Separate the two sections and insert them
individually into sockets on the back of the
chair.
3. Reattach the flaps.
4. Replace headrest cover.
figure 1
D
C
B
B
C
A
A
figure 3
E
figure 2