Product Manual

Trunk Support
Item # TK 1080 S, TK 1080 M & TK 1080 L
Install mounting bracket and post directly behind the
uprights. Loosen knobs (V) on the post and slide chest
prompt rods into the post at desired position. Tighten
knobs.
Trunk support adjustments
Thetrunksupporthastwoadjustablestrapsandbuckles
on each side. The front of the trunk support also has a
restraining loop to keep the pads together. Each strap is
independentlyadjustabletoadjustthesize,fitandangle
of the trunk support.
Height - Push in button (I) and slide post to desired posi-
tion. Release button and move post until it clicks into
place.
Width – Trunk support can be placed closer or farther
from the user by
• Looseningknobs(V)andslidingthetrunksupport
outward or inward.
• Placemountingbracketwiththeclampfacingtowards
the outside or inside of the handlebar
Depth – Reposition mounting bracket on handlebar.
Rotation – Loosen knobs (V) and tilt trunk support to
desired position. Tighten knobs.
V
V
I
X
W
Y
Thigh Prompts
Item #s TK 1090 S & TK 1090 L
Install thigh prompt clamps on handlebar. It is advisable
to mount them behind the trunk support.
Thigh prompt adjustments
Height – Loosen knob (W) and slide thigh pad (X) up or
down to desired position. Tighten knob.
Width – Thigh pads can be placed closer or farther from
the user by
• Looseningknob(Y),adjustthighpadsinwardor
outward and tighten knob
• Placemountingbracketwiththeclampfacingtowards
the outside or inside of the handlebar.
Depth - Reposition mounting bracket on handlebar.
Rotation – Loosen knob (W), rotate the thigh pad and
tighten knob.