Product Manual

1. Seat angle can be adjusted by opening knob (A)
on each side and positioning in proper groove.
2. Seat height can be adjusted by opening knob
(B) under the front face plate.
3. Seat depth can be adjusted by opening knob
under seat and sliding pelvic stabilizer to
desired position.
4. Pelvic stabilizer can be removed if not required.
5. Pelvic stabilizer width can be adjusted by
opening 4 knobs (C) and moving side panels to
desired position. The side panels can be
removed if desired.
6. Pelvic belt length can be adjusted by sliding
belts through belt buckles.
7. Leg retainers (D) can be raised or lowered for
additional lower leg positioning and alignment.
adjustments:
The Straddler Bolster Chair was designed as a
seating choice for individuals whose legs tend to
adduct. It promotes sitting in an upright position,
increases the hip to back angle and permits the
pelvis to tilt anteriorly. It assists with sit to stand
activities and encourages independence in getting
on and off the chair.
Your Straddler Bolster Chair comes in one carton
completely assembled.