Product Manual

Seat Depth
Seat depth can be adjusted by removing rear wheels and
Allen screw (L) pushing/pulling seat rail to desired posi-
tion and replacing allan screw.
Seat to Back Angle
Seat to back angle can be adjusted by loosening Allen
screw (M) on backrest pivot plate and moving back to
desired position. Tighten screw.
B
L
M
C
Armrests
Height can be adjusted by removing Allan screws (N)
and raising or lowering black bracket (O). Replace Allen
screws and tighten. Angle can be adjusted by turning
knob (P) clockwise or counterclockwise.
Tilt-in-Space
Tilt can be achieved by pressing tilt-in-space release lever
(Q) and using both hands to press down on both push
handles.
Push Handles
Height can be adjusted by loosening ratchet handle (R)
and raising or lowering to desired position.
Q
R
E
T
O
N
P
Anti Tippers
Height can be adjusted by pulling on chrome disc (S) to
release anti tipper. Raise or lower to one of the five pre-
drilled holes.
Folding
Raise armrests and swing footplates up. Remove seat and
back. Fold push handles by lifting lever (T) and lowering
push handles. Lift strap on top of cross bar and press the
side frames together firmly.
S
L
M
S
P
T