Product Manual

support kit accessory
lateral support
1. Remove screws (C) (figure 1) on back support.
2. Mount lateral support bar. Ensure that the black
washer is in between the back support and the
lateral support bar (figure 4).
3. Loosen height/width adjust knob (D) (figure 5)
and insert lateral support.
4. Adjust height by raising or lowering lateral
support bracket (E) to desired height and
tightening knob to secure in place.
5. To adjust width, loosen knob (D), push/pull
lateral pad to desired width and tighten knob
to secure in place.
figure 4
figure 5
E
D