Product Manual

support kit accessory
trunk harness
1. Attach shoulder straps to Velcro strips on back
of chair (figure 1). Adjust to desired height.
2. Open harness belt and loop around the back of
the chair. Adjust and close to desired width
(figure 1).
3. Upon initial use, adjust belt clip (A) to
appropriate size (figure 2).
4. Use zipper to secure user and provide anterior
chest support.
abductor
1. Insert abductor into square receptacle under
seat (figure 3).
2. Adjust abductor to desired depth and tighten
knob (B) to secure.
figure 1
figure 2
figure 3
A
B
C