Product Manual

ManualsBrandsWenzelite ManualsMobilitySupport Kit for First Class School Chair

first class chair

support kit accessory

item# FC 8025 & FC 8025L

(for use with item# FC 2000 & FC 4000)

includes trunk harness,

abductor, & lateral supports

EU Authorized Representative

Drive International, LLC

Globe Lane - Stockport

DUKINFIELD SK16 4RE, GB

Summary of content (4 pages)

PAGE 1
first class chair support kit accessory item# FC 8025 & FC 8025L (for use with item# FC 2000 & FC 4000) includes trunk harness, abductor, & lateral supports EU Authorized Representative Drive International, LLC Globe Lane - Stockport DUKINFIELD SK16 4RE, GB
PAGE 2
support kit accessory trunk harness 1. 2. 3. 4. Attach shoulder straps to Velcro strips on back of chair (figure 1). Adjust to desired height. Open harness belt and loop around the back of the chair. Adjust and close to desired width (figure 1). Upon initial use, adjust belt clip (A) to appropriate size (figure 2). Use zipper to secure user and provide anterior chest support. A C figure 2 figure 1 abductor 1. 2. Insert abductor into square receptacle under seat (figure 3).
PAGE 3
support kit accessory lateral support 1. 2. 3. 4. 5. Remove screws (C) (figure 1) on back support. Mount lateral support bar. Ensure that the black washer is in between the back support and the lateral support bar (figure 4). Loosen height/width adjust knob (D) (figure 5) and insert lateral support. Adjust height by raising or lowering lateral support bracket (E) to desired height and tightening knob to secure in place.
PAGE 4
two year limited warranty Your Drive brand product is warranted to be free of defects in materials and workmanship for two years from the date of the original consumer purchase. This device was built to exacting standards and carefully inspected prior to shipment. This Two Year Limited Warranty is an expression of our confidence in the materials and workmanship of our products and our assurance to the consumer of dependable service.