Product Manual

first class chair
installation
1. Remove contents from carton.
2. Turn seat upside down and open knobs
(A) by turning counter clockwise (figure 1).
3. Slide back support bracket (B) into red seat
assembly (C) on the underside of the the seat.
4. Tighten knobs (A) to secure back.
5. Insert armrests as per diagram (figure 2).
adjustments
Seat Depth
Loosen knobs (A), pull/push back to the desired
position and tighten knobs to secure in place.
Seat Height
Loosen knobs (D) on each leg, pull/push inner leg to
desired position and tighten knobs to secure in place.
A 15˚ anterior or posterior tilt can be achieved by
setting front and back legs at different heights.
Armrest Height and Width
Loosen knob (E) and adjust height and width as
appropriate and tighten knob (E).
Lap Belt
Adjust belt length through belt buckle and secure
with the Velcro. Additional length can be achieved
by adjusting the placement of belt on Velcro strips
on the underside of seat.
figure 2
A
B
C
figure 1
D
accessories
(sold separately)
Description Item #
Tray FC 2024 & FC 4024
Footrest FC 2028 & FC 4018
Headrest FC 8000
Headrest Wedges WD 8000
Hip Guides FC 8027
Mobility Base FC 2029 & FC 4029
Leg Extensions FC 8050
Anti Tippers FC 2030 & FC 4030
Support Kit FC 8025 & FC 8025L
Clear Tray FC 2026 & FC
E