Product Manual

dial-a-speed tabs

CE 1400

variable resistance tabs for use

with all anterior and posterior

safety rollers and gait trainers

www.drivemedical.com

EU Authorized Representative

Drive International, LLC

Globe Lane - Stockport

DUKINFIELD SK16 4RE, GB

Your Drive brand product is warranted to be free

of defects in materials and workmanship for 2

years from the time of the original consumer pur-

chaser.

This device was built to exacting standards and

carefully inspected prior to shipment. This Two

Year Limited Warranty is an expression of our

confidence in the materials and workmanship of

our products and our assurance to the consumer

of years of dependable service.

This warranty does not cover device failure due to

owner misuse or negligence, or normal wear and

tear. The warranty does not extend to non-durable

components, such as rubber accessories, casters,

and grips, which are subject to normal wear and

need periodic replacement.

If you have a question about your Drive device or

this warranty, please contact an authorized Drive

dealer.

2 year limited

warranty

Drive is a trademark of Medical Depot, Inc.

Port Washington N.Y. 11050 USA Made in China

PAGE 1
2 year limited warranty Your Drive brand product is warranted to be free of defects in materials and workmanship for 2 years from the time of the original consumer purchaser. This device was built to exacting standards and carefully inspected prior to shipment. This Two Year Limited Warranty is an expression of our confidence in the materials and workmanship of our products and our assurance to the consumer of years of dependable service.
PAGE 2
installation adjustment 1. Remove nut. 2. Insert bolt into Component A & B. 3. Insert bolt and Component A & B into the fork assembly. NOTE: Screw head should face the wheel. 4. Mount nut on the outside of fork assembly. 5. Tighten nut and bolt. Turn knob clockwise to increase tension on wheel and counter-clockwise to decrease tension on wheel.