USB - SATA HDD CONVERTER USB 3.0 Modell: 95686 USB - SATA HDD CONVERTER USB 3.
Bedienungsanleitung USB - SATA HDD CONVERTER USB 3.0 Modell: 95686 ACHTUNG! Lesen Sie die Bedienungsanleitung vollständig und sorgfältig durch. Sie ist Bestandteil des Produktes und enthält wichtige Hinweise zur korrekten Inbetriebnahme und Benutzung. Bewahren Sie sie auf, damit Sie diese bei Weitergabe des Gerätes an andere Personen übergeben können.
• • • • • • • • • • Setzen Sie das Gerät keinen hohen Temperaturen, mechanischen Belastungen oder Feuchtigkeit aus, bzw. Stellen, die mit Wasser in Berührung kommen können. Stellen Sie keine Gegenstände auf das Gerät. Installieren Sie das Produkt nicht in der Nähe von Klimaanlagenöffnungen oder an Stellen, an denen es übermäßig viel Staub oder Rauch gibt, sowie an Stellen, an denen es Erschütterungen oder Schwingungen ausgesetzt ist.
Bedienungsanleitung kabel an. 4. Schließen Sie das USB 3.0-SATA-Adapterkabel nun an Ihren PC/Laptop an. Eine Hardwareerkennung erfolgt automatisch. 5. Installieren Sie ggf. den Treiber durch Einlegen der Treiber CD-ROM in Ihren PC/Laptop. 6. Folgen Sie dem Installationsassistenten. Hinweis: Unter Umständen ist es nötig den Datenträger vor Gebrauch zu formatieren. Nähere Informationen hierzu finden Sie in der Anleitung Ihres Datenträgers.
8 Technische Daten: Eingangsspannung 100-240 V AC / 50-60 Hz @ 0,6 A Ausgangsspannung 12 V @ max. 2,0 A Leistungsaufnahme max. 24 W Betriebssysteme WINDOWS XP, VISTA, 7 Kabellänge 0,6 m Netzkabellänge 1,8 m Gewicht (Set) 494 g Maße 195 x 155 x 85 mm Material Kunststoff 9 Gewährleistung und Haftung: • • • • • • • Der Hersteller gewährt 2 Jahre Garantie auf ein neues Gerät.
Bedienungsanleitung und Entsorgung von Altgeräten leisten Sie einen wichtigen Beitrag zum Schutz unserer Umwelt. WEEE Richtlinie: WEEE Nr.: 2002/96/EG 82898622 11 CE-Konformitätserklärung: Dieses Gerät ist mit der nach den Richtlinien 2004/108/EG und 2006/95/EG vorgeschriebenen Kennzeichnung versehen: Mit dem CE Zeichen erklärt Goobay ®, eine registrierte Marke der Wentronic GmbH, dass das Gerät die grundlegenden Anforderungen und Richtlinien der europäischen Bestimmungen erfüllt.
Manual USB - SATA HDD CONVERTER USB 3.0 Model: 95686 ATTENTION! Please read the user manualcompletely and carefully. It is part of the product and includes important information for proper installation and use. Keep this guide to have it available, when there are uncertainties, or the product will be passed on.
• • • • • • • • Place the product only on horizontal and flat surfaces to avoid falling. Do not modify and alter the product and any accessories! Make sure you also read the Chapter “Warranty and Liability”. Do not use any damaged parts. Do not use any damaged parts. Plug and unplug all cables slowly and carefully. During transport, observe the details listed in the Chapter “Specifications”, and implement measures suitable for transport, e.g. use the original package.
Manual the driver CD-ROM into your PC/Laptop. 6. Follow the installation guide. Note: It may be neccessary to format the HDD before use. Find further information in the manual of your HDD. 6 Care, Maintenance, Storage and Transport: ATTENTION! There is a risk of electric shock and short circuit! • • • • • • • • The device is maintenance-free. Always disconnect the mains plug from mains at first! Use a dry linen cloth to clean your product, or use a slightly moist cloth for heavy stains.
9 Warranty and Liability: • • • • • • The producer grants a 2 years warranty to a new device. As the manufacturer has no influence on installation, warranty of the product only applies to the product. If any fault or damage is detected on your device, please contact your dealer and provide your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will repair the fault either on site, or send the device to the manufacturer.
Revision Date 2011-06-23 Version 1 Goobay ® Pillmannstraße 12 38112 Braunschweig Germany www.goobay.