Instruction Manual ii 11/12 Wenger NA 15 Corporate Drive Orangeburg, NY 10962 USA Tel: 1-800-431-2996, 1-845-365-3500 Email: custsvc@wengerna.com Web: www.WengerNA.
Table of Contents Crafted for Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Watch Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Features and Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operating Instructions (all features not available on all watches) Setting the Time and Date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crafted For Life Delémont, Switzerland 1893 Over a century ago, Wenger built a factory in this tiny Swiss village and transformed it into production headquarters for the Genuine Swiss Army Knife™ still used by the Swiss Army today. As it was 100 years ago, each tool, implement and knife manufactured by Wenger is crafted by hand in solid stainless steel and each individually inspected for quality and craftsmanship. This same attention to detail has been applied to genuine Wenger watches.
General Features and Components Optional Features Bracelet or strap • Tachymeter measures speed over a known distance • Internal rotating bezel Rotating bezel • Date display window Top pusher Subdials (two or three) • Day of the week display subdial • Screw-down crown for added water resistance • Dual time zone option to track time in two known time zones Crown (used to set date and time) Regular seconds hand Case 4 • Rotating bezel measures elapsed time, dual time zone, and countdown timer Botto
Position 1 Position 2 Position 3 1. Pull out the crown to Position 2 (one “click” out). Rotate crown counterclockwise until the date shows one day earlier than the date you want to set. 2. Pull out the crown to Position 3 (two “clicks” out). Rotate crown so the watch hands move clockwise until the current date shows. Then set the watch hands to the correct time. Turn the watch hands past 12 once if you’re setting the watch for a P.M. time.
Stopwatch 5. To stop timing the total event, push the top pusher. 1. To start the stopwatch, push the top pusher. 6. Reset the stopwatch to zero by pushing the bottom pusher. 2. To stop it, push the top pusher again. Recalibrating the Timer Hands on 30-Minute Models (for Ladies Sport Chronos see p.10) 3. Read the 1/10th seconds, seconds, and minutes on the appropriate dials. 4. To reset the stopwatch to zero, push the bottom pusher.
Recalibrating the Timer Hands on Ladies Sport 30-Minute Chronos 12-Hour Chrono Series The timer hands are preset to begin at zero. It is possible that over time the hands will not begin at zero. If this happens you will need to recalibrate the hands. You may also set them to begin at a different point (see below). 1. To recalibrate the 30-minute timer, pull the crown out to Position 2. Press the bottom pusher repeatedly until seconds hand is in desired starting position. 2.
Setting the Time and Date Position 1 Position 2 Position 3 Follow instructions on p.6. Using the 12-Hour Chronograph (Stopwatch) Feature The chronograph feature is a stopwatch which measures hours, minutes, and seconds. It is also capable of measuring split-timed events (timing a continuous event and sub-events simultaneously; e.g., timing an individual lap and an entire race). Stopwatch 1. To start the stopwatch, push the top pusher. 2. To stop it, push the top pusher again. 3.
5. To stop timing the total event, push the top pusher. Additional Features 6. Reset the stopwatch to zero by pushing the bottom pusher. (All features may not be available on all models) Recalibrating the Timer Hands on 12-Hour Models Rotating Bezel 1. Pull out the crown to position 3. This feature enables you to track elapsed time. 2. Hold both pushers down simultaneously for 2 seconds; the center hand will rotate to indicate that the corrective mode is activated. Release the pushers. 1.
Deployant Buckles on Bracelets 3-Year Limited Warranty Deployant buckles on bracelets are generally double deployant, or two-sided to hide the buckle and give the bracelet a seamless appearance. Wenger is proud to stand by our quality Swiss craftsmanship with a 3-Year Limited Warranty. This Wenger watch is warranted to the original consumer/ purchaser against breakage or malfunction under normal use due to defects in material or workmanship.
Warranty Service In the United States, please send your watch to: WWRC, 15 Corporate Drive, Orangeburg, NY 10962. Please include a check or money order payable to Wenger NA in the amount of $10(US) to cover the cost of return shipping and handling. For battery replacement, please include a check or money order payable to Wenger NA in the amount of $20(US) to cover the cost of return shipping, battery change, and pressure testing the watch for water-resistance.
Wenger Watch Registration Notes: ______________________________________________________________ For your convenience you can register online at www.wengerna.com/warranty or complete the form below and mail it to the address on the back. Please register your watch within 60 days from date of purchase.
