WORK STATION WITH LIGHT Model # WB4723 For replacement parts visit WENPRODUCTS.COM bit.ly/wenvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
TABLE OF CONTENTS Product Specifications Important Safety Rules Electrical Information Maintenance Exploded View & Parts List Assembly & Adjustments Warranty Statement 2 3 4 5 6 8 14 PRODUCT SPECIFICATIONS Model Number: Maximum Weight Capacity: WB4723 Total - 514 lbs (Evenly Distributed) Table Top - 220 lbs Bottom Shelf - 200 lbs Each Drawer - 25 lbs Top Shelf - 44 lbs Table Top Dimensions: 47-1/4 x 23-1/2 x 5/8 inch Table Height: 35 inch Drawer Dimensions: 20 x 17-3/4 x 2-1/2 inch Power Outlet Rating: 3
IMPORTANT SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, read and understand this entire instruction manual. Learn the tool’s applications, limitations, and possible hazards. These safety rules cannot address every possible scenario you may encounter, so please use common sense and caution when using the tool. WORK AREA SAFETY 1.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. Do not modify the plug provided.
MAINTENANCE WARNING: To avoid accidents, make sure the power switch is in the OFF position and unplug the tool from the electrical outlet before assembly, cleaning or performing any maintenance. 1. Before each use, inspect the general condition of the tool. Check for: • Loose hardware, • Misalignment or binding of moving parts, • Damaged cord/electrical wiring, • Cracked or broken parts, and • Any other condition that may affect its safe operation. 2.
EXPLODED VIEW & PARTS LIST Unpack and remove all parts from the box. Check all components and organize them according to the parts list below. If any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com. No. 1 2 3 Part No. WB4723-001 WB4723-002 WB4723-003 Description Front Post Back Post Rubber Foot Qty.
EXPLODED VIEW & PARTS LIST 21 16B 17L 17R 16F 15L 15R 19 18 4A 4 9L 2 7B 8 7F 6 5 4 9R 2 20 (Under Part 20) 4 1 1 5 13 13 3 12 12 10L 10L 10R 14 11 10R 14 11 7
including all text under subheadings therein before set up or useat ofthe thisbeginning product. of t Read the ENTIRE IMPORTANT SAFETY INFORMATIONS section including all text under subheadings therein before set up or use of this product. ASSEMBLY & ADJUSTMENTS Note: Unless stated otherwise, all connections are 4. Attach Side Beam (4) and Side Bea Assembly of the work station requires two people. Get a good buddy (or a trustworthy foe) to help you. made Bolts, Washers and all Nuts (B).
5. Attach Power Strip (22) to Side Beam with Power Strip OpeningE using U Brackets F ASSEMBLY & ADJUSTMENTS (F) and Screws (E). E(See Figure C.) 22 E 4. Installing Upper Side Beams (4, 4A) Attach one side beam (4) and the side beam with power strip opening (4A) to the top 2 holes on the front posts (1) and middle 2 holes on the back posts (2), using M6x10 bolts, washers and nuts (B). See Figure C.
to the Front (11) and Back (12) D Repeat for second Drawer. (See 7B 7. ASSEMBLY & ADJUSTMENTS 11. Drawer (13) down sure on a 12.Lay Install the Bottom Drawers, making Attach Front (7F) and Back (7B) Drawer Brackets to Top Beams (6). (See Figure E.) 7B 7F Attach Right (10R) and Left D the Drawers are level with(10L) the Dr to the Front (11) and Back (12) Draw 7. Mounting 14 Repeat for second Drawer. (See Fi Drawer Brackets (7F, 7B) Attach the front (7F) and back (7B) 12.
to the Front (11) and Back (12) Drawer Panels. Repeat for second Drawer. (See Figure 12 G.) 10L ASSEMBLY ADJUSTMENTS 12. Install the Drawers, making sure the & runners on the Drawers are level with the Drawer Mounts A A 11 A A 11 11. Attaching Drawer Panels (10L, 10R, 11, 12, 13) Lay one drawer bottom (13) down on a flat surface. Attach the right (10R) and left (10L) drawer panels to the inside of the front (11) and back (12) drawer panels. See Figure G. Repeat for second drawer.
using Bolts, Washers and Nuts (D). (S using Bolts, Washers and Nuts (C). (See Figure I.) ASSEMBLY & ADJUSTMENTS D 19. Attach Top Shelf (21) to the Shelf Beams using Bolts, Washers and Nuts (D). (Se 17. Attaching Pegboard (18) Attach the pegboard (18) to the back upper posts (15), using M6x16 bolts, washers, nuts (C). See Figure I. 17. Attach Pegboard (18) to Back Upper Posts (15) using Bolts, Washers and Nuts (C). C (See Figure I.) D C 18 18 C C C Figure I C 18.
19. Attach Top Shelf (21) to the Shelf Beams & (17L, 17R) ASSEMBLY ADJUSTMENTS using Bolts, Washers and Nuts (D). (See Figure K.) D D D D 21 19. Attaching Top Shelf (21) Attach the top shelf (21) to the shelf beams (17L, 17R) using bolts, washers and nuts (D). See Figure K. 20. Attaching Light Fixture (23) Attach the light fixture (23) to the underside of the top shelf (21) using M4x16 screws (G). a. Insert a screw through each of the light fixture clips. C b.
LIMITED TWO YEAR WARRANTY WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
THANKS FOR REMEMBERING
