Use and Care Manual

SPECIFICATIONS

INTRODUCTION

Thanks for purchasing the WEN Benchtop Planer. We know you are excited to put your tool to work, but ﬁrst, please

take a moment to read through the manual. Safe operation of this tool requires that you read and understand this

operator’s manual and all the labels afﬁxed to the tool. This manual provides information regarding potential safety

concerns, as well as helpful assembly and operating instructions for your tool.

NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.

WEN reserves the right to change this product and speciﬁcations at any time without prior notice.

At WEN, we are continuously improving our products. If you ﬁnd that your tool does not exactly match this manual,

please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-847-429-9263.

Keep this manual available to all users during the entire life of the tool and review it frequently to maximize

safety for both yourself and others.

Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your

careful attention and understanding. Always follow the safety precautions to reduce the risk of ﬁre, electric shock

or personal injury. However, please note that these instructions and warnings are not substitutes for proper ac-

cident prevention measures.

Model Number PL1337

Motor 120V, 60 Hz, 15A

Cutterhead Speed (No-Load) 10,000 RPM

Number of Cutting Inserts 26

Cutting Inserts 14mm x 14mm, 2-sided, HSS

Feed Rate 16 FPM / 26 FPM

Maximum Depth of Cut

1/8 in. (for material < 6 in. wide)

1/16 in. (for material > 6 in. and < 13 in. wide)

Maximum Workpiece Width

13 in.

Maximum Workpiece Thickness 6 in.

Dust Chute Adapter Sizes 2-1/2, 4 in.

Extension Tables Size 14 in. x 12 in.

Product Dimensions 22-1/4 in. x 34-5/8 in. x 20 in.

Product Weight 69.0 lbs